Sierra Wireless 300 manual +WS70=20

Page 15

DART 300 Migration Guide		Sample Configurations
Table 2-4 Host TCP Setup (client) (continued)

DART 200 Command	DART 300 Equivalent	Description

\Q2 (default)	N/A	Use hardware flow control (RTS/CTS). The
		DART 300 supports only this flow control.
\T1 (default)	+WS70=20	Timed data forwarding (always used with binary
		data). The DART 200 configuration assumes use
		of the default value in S50 (20 tenths of a second).
*B0 (default)	N/A	Disable broadcast reception.
*C1 (default)	N/A	Enable SLIP TCP header compression.
*G1 (default)	N/A	Multicast address selection.

2110291 Rev 1.0

Page 9

Image 15

Contents Sierra Wireless Dart 300 Cdpd Modem Copyright Safety and HazardsImportant Notice PatentsRegulatory Information Contact Information RSA LicenseeContents Dart 300 Modem Migration Guide Comparative AT Command ReferenceIntroduction ReferencesDocument Structure Rev 1.0 November 8 CurrencyConventions Used in this Reference Dart 300 / SB300Sample UDP Setups +WS70=20 +WS62=0+WS63=0 \Q0Q0 default Disable Quiet mode F1 default Sample TCP Setups \J0 +WPSPNI=enter\O0 +WS45=1 S86=3 \J0 default +WS70=20 Serial Interface Specifications InterfacesDart RTS/CTS Control LinesModem Control Interface Packet Service InterfacesOperation Monitoring Network ConnectionChannel Acquisition Restrictions TCP Keep-Alive TCP CharacteristicsUDP Receive Locking UDP CharacteristicsPacket Assembly / Disassembly PAD Features Additional Control ConsiderationsEscape Sequence Automatic Transmission Packet Assembly Local EchoPacket Forwarding Manual TransmissionSpecifications Modem FeaturesRadio Specifications Electrical Specification 0xC0 AT Command SetBasic AT Commands Dart +++ AT++++WS62=1 Basic AT Commands Dart Options+WS45 PAD Local On-Line EchoSn? Basic AT Commands DartAT & Commands Dart Sn=xS2=128 +WS60=0 S2=43 +WS60=1S126 \J0 = +WPSPNI=enter AT \ Commands Dart Dart 300 Equivalent\F0 = +WS63=1 \F1-3 = +WS63=3\R1 AT * Commands Dart Dart 300 Equivalent+WPREG and +WPDEREG \R0Lp= +WS212=p = S30=0K1-2 = S30=tHspni/n AT Commands Dart Dart 300 EquivalentAip/n = +WS197=n+WPNEI=ipWith +WPCHAN Ln = +WPCHAN=n = +WPCHAN=0 AT + Commands Dart 300 Specific CommandsStatus, and channel number Indication RSSI, channel state, registrationStatus Registers RegistersRegisters Dart B4,5 +WS173? S-Registers DartB0,1 +WS56? B2,3With +WPRSSI 100101 102WS-Registers in the Dart 10 Dart 300 Result Codes Verbose Dart 300 Meaning Result Codes