Sony LDI-100B operating instructions Connecting the Personal LCD Display, Connecting a PC

Page 10

Connecting the Personal LCD Display

Connecting a PC

Be sure to turn off your PC before connecting the power supply box.

Notes

Do not use an RGB signal cable (HD15) which is 6.5 feet (2 m) or longer. The performance may be reduced.

Refer to the instruction manual supplied with your PC as well.

Depending on your computer, the audio port may be indicated as LINE OUT, headphone, speaker, etc.

Adjust sound volume on the computer.

Connecting other IBM compatible PCs

Connect the Personal LCD Display to your PC using a commercially available RGB signal (HD15) cable. When you connect the Personal LCD Display to your PC, set the PC-VIDEO switch on the power supply box to “PC.”

Power supply box

Set the PC-VIDEO switch to “PC.”

to monitor port

to audio port

 

or

PC RGB

AUDIO

to monitor port to audio port to PC AUDIO to RGB connector connector

Audio cable

RGB signal cable

: Signal flow

10-US

Image 10
Contents Personal LCD Display Information Declaration of ConformityPour les utilisateurs au Canada PrecautionsFor the customers in Canada For the customers in EuropePage Table of Contents Laser disc player, Camcorder About the Personal LCD DisplayPersonal Computer DVD playerFeatures Locating the parts and controls Display unitPower supply box Connecting a PC Connecting the Personal LCD DisplayConnecting other IBM compatible PCs Connecting a Macintosh Powerbook Connector Audio cable RGB signal cable Signal flow Connecting a Macintosh desktop modelsConnecting the Personal LCD Display MacintoshCamcorder, etc Connecting video equipmentTo audio/video output To AUDIO/VIDEO connector Special miniplug Phono plugAudio L Audio R If your video equipment has an S-video jackVideo Connecting the power source Loosen the back strap Adjust the strapWearing the Personal LCD Display Put on the Personal LCD DisplayAdjust the stereo earphones Adjusting the back strapAdjust the angle of the display unit Front padWhen you connect to the S-video connector Adjust the sound volume by turning the VOL control Input the signal from the connected equipmentAdjust the brightness by turning the Bright control Darker brighterInput signal Mega Bass Avls After you finish using Personal LCD DisplayUsing the Personal LCD Display Checking the display indicationsViewing the surrounding environment Set the Screen switch to onTurn the SEE-THROUGH dial PC mode RGB signal Adjusting the sound and pictureSignal compatibility Video mode video signalAdjusting the sound/picture HUE Ntsc Video mode onlyPC mode Adjusting the sound and picture Press MenuAdjust the setting using the jog dial Video modeIndicator Avls Auto Volume Limiter SystemPicture Power Turn the jog dial to set to ON, then press the jog dialAdjusting the RGB signal Adjusting the sound and pictureHUE Ntsc Video mode only Adjusting the video signalResetting the adjustments to the factory preset level LessmoreAttach the battery pack to the power supply box Using the optional battery packCharging the battery pack Connect the AC power adapter to the DC in connector onMark appears on Checking the remaining battery lifeFully Remaining battery life Dead Charged ScreenUse PrecautionsInstallation Unified polarity plugOthers Error messages OUT of Scan RangeTroubleshooting Symptom Cause RemedyTroubleshooting Pin No Signal SpecificationsPin Assignment K, L, M, N O IndexY, Z