3 Input the signal from the connected equipment.
When you connect the PC:
Adjust the screen resolution. For details, see “Signal compatibility” on page 22.
When you display VGA pictures (640 × 480), the picture appears about 60% of the entire screen.
Notes
•If no picture appears, check the default setting of your PC to output the external RGB signal from the monitor connector.
•Some PCs do not output external display signal when they turn on, or switch to external
display mode. Change the display mode of your PC, referring to the instruction manual supplied with your PC.
When you connect the video equipment:
Start playback on the video equipment connected to the Personal LCD Display.
When you display NTSC video picture, the picture appears about 60% of the entire screen. For PAL video picture, the picture appears about 84% of the entire screen.
4 Adjust the brightness by turning the BRIGHT control.
BRIGHT 
BRIGHTNESS
darker brighter
5 Adjust the sound volume by turning the VOL control.
When you set AVLS (Auto Volume Limiter System) in the menu to on, you cannot turn up the volume beyond the defined limit (see page 23). If the audio input level is too high, the sound may be distorted. Turn the volume down using the VOL control.
VOL
lower louder
continued
Operations