Sony LDI-100B operating instructions Error messages, OUT of Scan Range

Page 32

Error messages

The following error messages may appear to indicate the status of the Personal LCD Display or input signal.

OUT OF SCAN RANGE

The input signal does not match the supported specification.

Change the screen resolution on your PC. For details of the signal compatibility, see “Signal compatibility” (page 22).

NO INPUT SIGNAL

The signal is not input.

•Make sure that the PC-VIDEO switch is correctly set.

•Make sure that the connected equipment is turned on.

•Make sure that your PC is not in the power saving mode.

HIGH TEMPERATURE

The Personal LCD Display temperature is high.

Turn off the Personal LCD Display for a while, then turn it on again.

Note

If you cover the ventilation openings of the power supply box, an error may occur due to a rise in temperature. In addition, it may cause a fire or malfunction of the unit.

32-US

Image 32

Contents Personal LCD Display Information Declaration of ConformityPrecautions For the customers in CanadaPour les utilisateurs au Canada For the customers in EuropePage Table of Contents About the Personal LCD Display Personal ComputerLaser disc player, Camcorder DVD playerFeatures Locating the parts and controls Display unitPower supply box Connecting other IBM compatible PCs Connecting the Personal LCD DisplayConnecting a PC Connecting a Macintosh Powerbook Connecting a Macintosh desktop models Connecting the Personal LCD DisplayConnector Audio cable RGB signal cable Signal flow MacintoshConnecting video equipment To audio/video output To AUDIO/VIDEO connectorCamcorder, etc Special miniplug Phono plugVideo If your video equipment has an S-video jackAudio L Audio R Connecting the power source Adjust the strap Wearing the Personal LCD DisplayLoosen the back strap Put on the Personal LCD DisplayAdjusting the back strap Adjust the angle of the display unitAdjust the stereo earphones Front padWhen you connect to the S-video connector Input the signal from the connected equipment Adjust the brightness by turning the Bright controlAdjust the sound volume by turning the VOL control Darker brighterAfter you finish using Personal LCD Display Using the Personal LCD DisplayInput signal Mega Bass Avls Checking the display indicationsTurn the SEE-THROUGH dial Set the Screen switch to onViewing the surrounding environment Adjusting the sound and picture Signal compatibilityPC mode RGB signal Video mode video signalAdjusting the sound/picture HUE Ntsc Video mode onlyAdjusting the sound and picture Press Menu Adjust the setting using the jog dialPC mode Video modeAvls Auto Volume Limiter System Picture PowerIndicator Turn the jog dial to set to ON, then press the jog dialAdjusting the RGB signal Adjusting the sound and pictureAdjusting the video signal Resetting the adjustments to the factory preset levelHUE Ntsc Video mode only LessmoreUsing the optional battery pack Charging the battery packAttach the battery pack to the power supply box Connect the AC power adapter to the DC in connector onChecking the remaining battery life Fully Remaining battery life Dead ChargedMark appears on ScreenPrecautions InstallationUse Unified polarity plugOthers Error messages OUT of Scan RangeTroubleshooting Symptom Cause RemedyTroubleshooting Pin Assignment SpecificationsPin No Signal Y, Z IndexK, L, M, N O