Sony LDI-100B If your video equipment has an S-video jack, Audio L Audio R, Video

Page 14

Connecting the Personal LCD Display (continued)

If your video equipment has an S-video jack

Connect the Personal LCD Display to the video equipment using a commercially available

S-video cable and an audio/video cable to enjoy the highest quality pictures. In this case, you do not need to connect the video (yellow) plug. If you connect both the S-video and video plugs, the S-video signal is automatically selected. When you connect the Personal LCD Display to the video equipment, set the PC- VIDEO switch on the power supply box to “VIDEO.”

Set the PC-VIDEO switch to “VIDEO.”

Power supply box

S-video cable

to S VIDEO connector

VCR, Laser disc player, DVD player, camcorder, etc.

S VIDEO

AUDIO / VIDEO

to AUDIO/VIDEO connector

: Signal flow

to S-video output

to audio/video output

Audio/video cable

(special miniplug special miniplug)

		Video (yellow)
		Audio L (white)
	Audio/video cable
	(special miniplug	phono
	plug)	Audio R (red)
	plug)	to audio/video outputs
		to audio/video outputs

About the AUDIO/VIDEO input jack

The AUDIO/VIDEO input jack of the Personal LCD Display is a special minijack, and the signal connections are aligned as shown on the right. This alignment may differ depending on the equipment.

Audio L

Audio R

GND

Video

14-US

Image 14

Contents Personal LCD Display Information Declaration of ConformityPour les utilisateurs au Canada PrecautionsFor the customers in Canada For the customers in EuropePage Table of Contents Laser disc player, Camcorder About the Personal LCD DisplayPersonal Computer DVD playerFeatures Locating the parts and controls Display unitPower supply box Connecting other IBM compatible PCs Connecting the Personal LCD DisplayConnecting a PC Connecting a Macintosh Powerbook Connector Audio cable RGB signal cable Signal flow Connecting a Macintosh desktop modelsConnecting the Personal LCD Display MacintoshCamcorder, etc Connecting video equipmentTo audio/video output To AUDIO/VIDEO connector Special miniplug Phono plugVideo If your video equipment has an S-video jackAudio L Audio R Connecting the power source Loosen the back strap Adjust the strapWearing the Personal LCD Display Put on the Personal LCD DisplayAdjust the stereo earphones Adjusting the back strapAdjust the angle of the display unit Front padWhen you connect to the S-video connector Adjust the sound volume by turning the VOL control Input the signal from the connected equipmentAdjust the brightness by turning the Bright control Darker brighterInput signal Mega Bass Avls After you finish using Personal LCD DisplayUsing the Personal LCD Display Checking the display indicationsTurn the SEE-THROUGH dial Set the Screen switch to onViewing the surrounding environment PC mode RGB signal Adjusting the sound and pictureSignal compatibility Video mode video signalAdjusting the sound/picture HUE Ntsc Video mode onlyPC mode Adjusting the sound and picture Press MenuAdjust the setting using the jog dial Video modeIndicator Avls Auto Volume Limiter SystemPicture Power Turn the jog dial to set to ON, then press the jog dialAdjusting the RGB signal Adjusting the sound and pictureHUE Ntsc Video mode only Adjusting the video signalResetting the adjustments to the factory preset level LessmoreAttach the battery pack to the power supply box Using the optional battery packCharging the battery pack Connect the AC power adapter to the DC in connector onMark appears on Checking the remaining battery lifeFully Remaining battery life Dead Charged ScreenUse PrecautionsInstallation Unified polarity plugOthers Error messages OUT of Scan RangeTroubleshooting Symptom Cause RemedyTroubleshooting Pin Assignment SpecificationsPin No Signal Y, Z IndexK, L, M, N O