Sony LDI-100B For the customers in Canada, Pour les utilisateurs au Canada, Precautions

Page 3

The shielded interface cable recommended in this manual must be used with this equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.

For the customers in Canada

CAUTION

TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS POLARIZED AC PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

Pour les utilisateurs au Canada

ATTENTION

POUR PREVENIR LES CHOCS ELECTRIQUES, NE PAS UTILISER CETTE FICHE POLARISEE AVEC UN PROLONGATEUR, UNE PRISE DE COURANT OU UNE AUTRE SORITIE DE COURANT, SAUF SI LES LAMES PEUVENT ETRE INSEREES A FOND SANS EN LAISSER AUCUNE PARTIE A DECOUVERT.

For the customers in Europe

This product conforms with the following European Directives:

73/23/EEC, 93/68/EEC (Low Voltage Directive)

89/336/EEC, 92/31/EEC (EMC Directive)

This equipment complies with EN55022 Class B for use in following areas: residential, business and light-industrial.

The supplied interference cable must be used with the equipment in order to comply with the limits for a digital device pursuant to EN55022.

Für die Kunden in Deutchland

Diese Ausrüstung erfüllt die Europäischen EMC-Bestimmungen für die Verwendung in folgender/folgenden Umgebung(en):

Wohngegenden

Gewerbegebiete

Leichtindustriegebiete

(Diese Ausrüstung erfüllt die Bestimmungen der Norm EN55022, Klasse B.)

Precautions

One blade of the plug is wider than the other for safety purposes and will fit into the power outlet only one way. If you are unable to insert the plug fully into the outlet, contact your dealer.

You can use your Personal LCD Display in any country or area with the supplied AC power adapter within 100 V to 240 V AC, 50/60 Hz. Use a commercially available AC plug adapter [a], if necessary, depending on the design of the wall outlet [b].

AC-PLM3

[a] [b]

WARNING:

Using this unit at a voltage other than 120 V may require the use of a different line cord or attachment plug, or both.

To reduce the risk of fire or electric shock, refer servicing to qualified service personnel.

After operating the unit with an AC power adapter, disconnect the ac power adapter from the wall outlet if the set is not to be used for an extended period of time. The POWER switch on the power supply box does not turn the ac adapter off.

The nameplate is located on the bottom exterior.

Picture/sound distortion may occur if the model LDI-100B/100BE is positioned in close proximity to any equipment emitting electromagnetic radiation.

Owner’s record

The model and serial numbers are located at the rear of the power supply box. Record these numbers in the spaces provided below. Refer to them whenever you call upon your Sony dealer regarding this product.

Model No.

Serial No.

3-US

Image 3
Contents Personal LCD Display Declaration of Conformity InformationFor the customers in Europe PrecautionsFor the customers in Canada Pour les utilisateurs au CanadaPage Table of Contents DVD player About the Personal LCD DisplayPersonal Computer Laser disc player, CamcorderFeatures Display unit Locating the parts and controlsPower supply box Connecting the Personal LCD Display Connecting a PCConnecting other IBM compatible PCs Connecting a Macintosh Powerbook Macintosh Connecting a Macintosh desktop modelsConnecting the Personal LCD Display Connector Audio cable RGB signal cable Signal flowSpecial miniplug Phono plug Connecting video equipmentTo audio/video output To AUDIO/VIDEO connector Camcorder, etcIf your video equipment has an S-video jack Audio L Audio RVideo Connecting the power source Put on the Personal LCD Display Adjust the strapWearing the Personal LCD Display Loosen the back strapFront pad Adjusting the back strapAdjust the angle of the display unit Adjust the stereo earphonesWhen you connect to the S-video connector Darker brighter Input the signal from the connected equipmentAdjust the brightness by turning the Bright control Adjust the sound volume by turning the VOL controlChecking the display indications After you finish using Personal LCD DisplayUsing the Personal LCD Display Input signal Mega Bass AvlsSet the Screen switch to on Viewing the surrounding environmentTurn the SEE-THROUGH dial Video mode video signal Adjusting the sound and pictureSignal compatibility PC mode RGB signalHUE Ntsc Video mode only Adjusting the sound/pictureVideo mode Adjusting the sound and picture Press MenuAdjust the setting using the jog dial PC modeTurn the jog dial to set to ON, then press the jog dial Avls Auto Volume Limiter SystemPicture Power IndicatorAdjusting the sound and picture Adjusting the RGB signalLessmore Adjusting the video signalResetting the adjustments to the factory preset level HUE Ntsc Video mode onlyConnect the AC power adapter to the DC in connector on Using the optional battery packCharging the battery pack Attach the battery pack to the power supply boxScreen Checking the remaining battery lifeFully Remaining battery life Dead Charged Mark appears onUnified polarity plug PrecautionsInstallation UseOthers OUT of Scan Range Error messagesSymptom Cause Remedy TroubleshootingTroubleshooting Specifications Pin No SignalPin Assignment Index K, L, M, N OY, Z