Sony LDI-100B operating instructions Connecting a Macintosh Powerbook

Page 11

Connecting a Macintosh Powerbook

Depending on the model, you may need to use a commercially available adapter to connect a commercially available RGB signal cable as shown below. When you connect the Personal LCD Display to your Powerbook, set the PC-VIDEO switch on the power supply box to “PC.”

to monitor

to RGB

port of

signal cable

Powerbook

 

Connector should match the monitor

VGA type connector

port of your Powerbook model.

(HD15, female)

Power supply box

Set the PC-VIDEO switch to “PC.”

to monitor port

to audio port

 

Adapter

PC

RGB

AUDIO

 

 

to PC AUDIO

to RGB connector

 

connector

 

Audio cable

Getting Started

RGB signal cable

: Signal flow

Note on connection

Set the display setting to 16-inch display mode (832 × 624) or 13-inch display mode (640 × 480).

The Personal LCD Display cannot display images with the 19-inch display mode (1024 × 768) setting or more.

continued

11-US

Image 11
Contents Personal LCD Display Declaration of Conformity InformationFor the customers in Europe PrecautionsFor the customers in Canada Pour les utilisateurs au CanadaPage Table of Contents DVD player About the Personal LCD DisplayPersonal Computer Laser disc player, CamcorderFeatures Display unit Locating the parts and controlsPower supply box Connecting other IBM compatible PCs Connecting the Personal LCD DisplayConnecting a PC Connecting a Macintosh Powerbook Macintosh Connecting a Macintosh desktop modelsConnecting the Personal LCD Display Connector Audio cable RGB signal cable Signal flowSpecial miniplug Phono plug Connecting video equipmentTo audio/video output To AUDIO/VIDEO connector Camcorder, etcVideo If your video equipment has an S-video jackAudio L Audio R Connecting the power source Put on the Personal LCD Display Adjust the strapWearing the Personal LCD Display Loosen the back strapFront pad Adjusting the back strapAdjust the angle of the display unit Adjust the stereo earphonesWhen you connect to the S-video connector Darker brighter Input the signal from the connected equipmentAdjust the brightness by turning the Bright control Adjust the sound volume by turning the VOL controlChecking the display indications After you finish using Personal LCD DisplayUsing the Personal LCD Display Input signal Mega Bass AvlsTurn the SEE-THROUGH dial Set the Screen switch to onViewing the surrounding environment Video mode video signal Adjusting the sound and pictureSignal compatibility PC mode RGB signalHUE Ntsc Video mode only Adjusting the sound/pictureVideo mode Adjusting the sound and picture Press MenuAdjust the setting using the jog dial PC modeTurn the jog dial to set to ON, then press the jog dial Avls Auto Volume Limiter SystemPicture Power IndicatorAdjusting the sound and picture Adjusting the RGB signalLessmore Adjusting the video signalResetting the adjustments to the factory preset level HUE Ntsc Video mode onlyConnect the AC power adapter to the DC in connector on Using the optional battery packCharging the battery pack Attach the battery pack to the power supply boxScreen Checking the remaining battery lifeFully Remaining battery life Dead Charged Mark appears onUnified polarity plug PrecautionsInstallation UseOthers OUT of Scan Range Error messagesSymptom Cause Remedy TroubleshootingTroubleshooting Pin Assignment SpecificationsPin No Signal Y, Z IndexK, L, M, N O