Sony LDI-100B operating instructions Troubleshooting, Symptom Cause Remedy

Page 33

Troubleshooting

Check the items listed below before contact an authorized service center.

Symptom

Cause

Remedy

The picture does not appear.

Connections are incorrect.

Connect the equipment correctly

 

 

(pages 10 to 15).

 

 

 

 

The signal is not input.

Select the correct input (page 18).

 

 

 

 

The Personal LCD Display enters power

Put the Personal LCD Display on

 

save mode.

again to bring the forehead near to

 

 

the POWER SAVING SENSOR

 

 

(page 8).

 

 

 

 

When you connect to a notebook

Change the display mode. For details,

 

type PC, the display mode is set to

refer to the instruction manual of your

 

local display mode (LCD panel of

PC.

 

your notebook PC).

 

 

 

 

The picture is dark or

You are not wearing the Personal LCD

Put on the Personal LCD Display

dim.

Display correctly.

correctly (pages 16 and 17).

 

 

 

 

Adjust the brightness with the BRIGHT

 

 

control (page 19).

 

 

 

 

Adjust the RGB signal synchronization

 

 

(page 26).

 

 

 

 

The inside window (where the picture is

Clean the display unit with a soft, dry

 

displayed) is dirty.

cloth.

 

 

 

The picture suddenly

You have set the POWER SAVE to ON

Put the Personal LCD Display on

disappears.

while you are not wearing the Personal

again to bring the forehead near to

 

LCD Display.

the POWER SAVING SENSOR

 

 

(page 8).

 

 

 

 

The battery pack is dead.

Charge the battery pack (page 28).

 

 

 

The picture has no sound.

Adjust the volume with the VOL control

The sound is noisy.

 

(page 19).

 

 

 

The volume does not

The AVLS function is on.

Set AVLS in the menu to OFF

increase.

 

(page 25).

 

 

 

 

The equipment is not connected

Connect the equipment correctly (pages

 

properly.

10 to 15).

 

 

 

 

The sound volume of the connected

Adjust the volume on the computer.

 

computer is inappropriate.

 

 

 

 

The battery pack

The battery pack is not charged

Charge the battery pack fully or use a

discharges quickly.

enough.

new one (page 28).

 

The battery pack is completely dead.

 

 

 

 

The battery pack is not

The battery pack is not installed

Install the battery pack properly

charged.

properly.

(page 28).

 

 

 

 

The battery pack is completely dead.

Replace the battery pack with a new one

 

 

(page 28).

 

 

 

 

The supplied AC power adapter is not

Use the supplied AC-PLM3 AC power

 

used.

adapter.

 

 

 

 

 

continued

Additional Information

33-US

Image 33
Contents Personal LCD Display Declaration of Conformity InformationFor the customers in Canada PrecautionsPour les utilisateurs au Canada For the customers in EuropePage Table of Contents Personal Computer About the Personal LCD DisplayLaser disc player, Camcorder DVD playerFeatures Display unit Locating the parts and controlsPower supply box Connecting the Personal LCD Display Connecting a PCConnecting other IBM compatible PCs Connecting a Macintosh Powerbook Connecting the Personal LCD Display Connecting a Macintosh desktop modelsConnector Audio cable RGB signal cable Signal flow MacintoshTo audio/video output To AUDIO/VIDEO connector Connecting video equipmentCamcorder, etc Special miniplug Phono plugIf your video equipment has an S-video jack Audio L Audio RVideo Connecting the power source Wearing the Personal LCD Display Adjust the strapLoosen the back strap Put on the Personal LCD DisplayAdjust the angle of the display unit Adjusting the back strapAdjust the stereo earphones Front padWhen you connect to the S-video connector Adjust the brightness by turning the Bright control Input the signal from the connected equipmentAdjust the sound volume by turning the VOL control Darker brighterUsing the Personal LCD Display After you finish using Personal LCD DisplayInput signal Mega Bass Avls Checking the display indicationsSet the Screen switch to on Viewing the surrounding environmentTurn the SEE-THROUGH dial Signal compatibility Adjusting the sound and picturePC mode RGB signal Video mode video signalHUE Ntsc Video mode only Adjusting the sound/pictureAdjust the setting using the jog dial Adjusting the sound and picture Press MenuPC mode Video modePicture Power Avls Auto Volume Limiter SystemIndicator Turn the jog dial to set to ON, then press the jog dialAdjusting the sound and picture Adjusting the RGB signalResetting the adjustments to the factory preset level Adjusting the video signalHUE Ntsc Video mode only LessmoreCharging the battery pack Using the optional battery packAttach the battery pack to the power supply box Connect the AC power adapter to the DC in connector onFully Remaining battery life Dead Charged Checking the remaining battery lifeMark appears on ScreenInstallation PrecautionsUse Unified polarity plugOthers OUT of Scan Range Error messagesSymptom Cause Remedy TroubleshootingTroubleshooting Specifications Pin No SignalPin Assignment Index K, L, M, N OY, Z