Sony RX100 Using the advanced features when using a BBV Tx1000DC, DS/DSL/DS2/BX2, ‘#’ Autopan

Page 26

BBV Rx 100 Interface Receiver

Addendum to manual for the following dome:

Philips AutoDome including G3A and G3B (RS232 control only, not Bi-Phase compatible)

Rx100 software RX1_P3V11

Application Notes

Variable speed Pan/Tilt.. Zoom/Focus, Autofocus. 16 full scene presets. 2 preset patrols. 4 alarm inputs driving to preset 1 – 4. Dome AutoPlay record & playback. Preshot title, Zone title, Menu Access

Advanced Features

 

Tx400DC

 

Tx1000

Tx1500

DM Sprite

DS/DSL/DS2/BX2

Display Menu

(Aux 46)

'#' 1

 

‘#’ WASH

1'#'

*889 002

*889 10 10 2

Program Zone Title(Aux 63)

'#' 2

 

‘#’ WIPE

2'#'

*889 003

*889 10 10 3

Record AutoPlay start/stop (Aux 100)

'#' 3

 

‘#’ AUTOPAN

3'#'

*889 004

*889 10 10 4

RESET DOME!

(Set 899)

'#' 4

 

‘#’ LIGHTS

4'#'

*889 005

*889 10 10 5

RS232 control of dome. Data rate, 9600 Baud, No parity, 8

Data bits, 1 Stop bits

 

 

 

Connection details:

 

 

 

 

 

 

 

 

Dome

Description

 

Rx100 or DMP100/124

 

 

 

RxD

RS232 I/P

 

 

J3/C1

 

 

 

 

Gnd

Gnd

 

J3/GND

 

 

 

 

 

Notes:

Configuration links:

J6/pin 1-2is used to select the address that the unit outputs. Fitted(Default) = Address 1, Removed = Address 10,000.

Removing the link allows the receiver to be used as an alarm input unit for domes that are controlled using bi-phase telemetry. This will work with late model domes with post 2002 software.

J6/pin3-4– preset title text is programmed following a save preset command by automatically issuing a aux(62) command. J6/pin4-5(Default) – the preset text command is not sent and the existing text is retained.

The alarm output relay opens for approx 5 seconds upon power up. This can be used to signal power loss, etc.

The dome must be RS232 controllable. BI-PHASE domes cannot be controlled.

Dome settings: Select dome address #0 or #1. Communications must be 9600, N, 8, 1. The G3 Basic address is software programmable, however as default the dome is addressed as #0. If the dome address is not #0 or #1 then the dome will require reprogramming using a Philips controller or removing link J6/1-2.

A TEST link is used to confirm correct operation of the Rx100 and dome and also that the RS485 connection is correct. Shorting the link after the Rx100 is powered up will cause the dome to pan left and zoom in. Removing the link cause the dome to zoom out and stop panning left. The green data led should also flash to indicate RS485 sent to the dome.

If the TEST link is shorted when power is applied to the Rx100 will cause a receiver self test function to start. This is an advanced function that BBV support engineers may request during fault diagnosis. To stop the self test, remove the link and power the Rx100 off and on again.

Using the advanced features when using a BBV Tx1000DC

Menu Access: Press and HOLD # and tap WASH TWICE will display the dome’s menu.

Use the joystick to navigate the cursor. FOCUS FAR or FOCUS NEAR can be pressed to enter the next menu item or to return press either IRIS OPEN or IRIS CLOSE. When completely out of the menu issue a goto preset command to put the interface into normal mode. Press and HOLD PRESET whilst taping 1 will move to preshot 1.

Program Zone Title: Press and HOLD # and tap WIPE will allow the title for the current zone to be programmed. Use the joystick as described on screen. Use the following keystrokes to program the text:

FOCUS NEAR – Select a current character, FOCUS FAR – Clear character, IRIS CLOSE – Backspace and IRIS OPEN – Return

Record Autoplay: Press and HOLD # and tap AUTOPAN will allow autoplay ‘A’ to be recorded.

Press FOCUS FAR or FOCUS NEAR to start the recording or IRIS CLOSE to abandon recording. Once recording has started, use the joystick and focus keys as required. To end the recording, press and HOLD # and tap AUTOPAN. The recording can be replayed continuously be pressing the AUTOPAN key.

Reset dome defaults: Press and HOLD # and tap LIGHTS TWICE to display the dome’s software version. Repeating the key strokes for a THIRD time will issue a SET 899 to reset the dome including ALL PRESET POSITIONS.

USE WITH EXTREME CARE AS ALL THE DOME PROGRAMMING WILL BE LOST.

Programming preshot text. To program a preshot position press PROGRAM then 1 followed by number of the preshot. EG to program preshot 1 press PROGRAM 1 1. To program preshot 2 press PROGRAM 1 2. To program preset 14 press PROGRAM 1 14. After the preshot has been programmed the interface issues an AUX 62 to display the preshot text menu. The same keystrokes are used to program preshot text as when programming zone titles.

Rx100 installation manual V1.17 29 Aug 08.doc

Page 26

Image 26
Contents Installation Guide Table of Contents Important Safety Precautions UnpackingRx100 installation manual V1.17 29 Aug 08.doc General RX100/WBXTransmitter Compatability Chart Tx300 Tx400 Tx400DC Tx1000 Tx1000DC Tx1500Cable Connection Method Function Connector Type Operating VoltageDiagnostic Aids Video Launch Amplifier and Cable Length CompensationRx100 Rx200 Rx300 Rx400P Rx400DC Rx45X AC Rx55X DC Simple Single Camera System Appendix a Dome addendums & connection details BBV Rx100/24 Supply Additional information iss pcb BBV Rx100 Interface Receiver # Autopan DAY Night ModeRX+ ‘#’ LightsBBV Rx 100 Interface Receiver TX+Rx100 software RX1D4V7 DM/DS/DSL/DS2Disable around Cursor Enable ALL SceneDisable ALL Scene AUTO/MANUAL Focus Toggle# Wash TX-/B TX+/ATxdi # Autopan# Lights TXDI+TX/RX+ TX/RXRED GreenBBV Rx 100 Interface Receiver ENTRY/EXIT Dome Menu ‘#’ # Wash ’#’ RX+ Lights Wiper WasherDM-DSL/DS/DS2 DS/DSL/DS2/BX2 Using the advanced features when using a BBV Tx1000DCReset Dome ‘#’ AutopanUsing the advanced features when using a BBV Tx400DC Control from DM Digital Sprite 2 systemsMenu Access when using DM DS/DSL/DS2 Menu Access when using a BBV Tx1000DCMenu Access when using a BBV Tx400DC Turn Menu Off *889 10 10DM DS/DS2/BX2 ‘#’ Lights AUTO, INDOOR, Outdoor‘#’ Autopan J3/GNDTX/RX TX/RX+Application Notes Privacy SET Toggle Mono/Colour ‘#’ # Wipe ’#’ TX/RX Comm AUX1AUX2 TX/RX+ Comm IN+’#’ 889 004 or *889 10 10 Stop Recording ‘#’ Protocol P/D RS485 B Appendix B Trouble shooting guide Blank for your notes VCL/HONEYWELL RS485 PHILIPS/BOSCH RS485 Optional BI-PHASE InputPelco P/D RS485 Dennard RS485

RX100 specifications

The Sony RX100 series has earned a reputation as one of the leading compact camera lines on the market, favored by both amateur photographers and professionals alike for its impressive performance and versatility in a pocket-sized design. Launched in 2012, the RX100 series has seen multiple iterations, each improving upon its predecessor while maintaining the core attributes that have resonated with consumers.

One of the standout features of the RX100 is its large, 1-inch Exmor CMOS sensor. This sensor size is typically found in larger cameras, allowing the RX100 to capture stunning images with remarkable detail and dynamic range. The sensor works in tandem with Sony's BIONZ image processor, which enhances image quality by reducing noise and increasing processing speed, resulting in crisp images even in low-light conditions.

The RX100 also boasts a fast and versatile lens with a wide maximum aperture, allowing for impressive background blur and excellent subject isolation. The original RX100 featured a 28-100mm equivalent f/1.8-4.9 lens, while subsequent models upgraded to even more powerful lenses, such as the 24-70mm f/1.8-2.8 option found in the RX100 V and VI. This versatility makes it ideal for various photography genres, from landscapes to portraits.

In terms of technology, the RX100 series incorporates advanced autofocus systems. The RX100 III introduced Fast Intelligent AF for quick focus, while later models enhanced this with features like Eye AF for precise focusing on the subject's eyes, making it a preferred choice for portrait photographers. Additionally, the cameras offer high-speed shooting options, capable of capturing action shots at impressive burst rates.

The video capabilities of the RX100 series are equally noteworthy, with support for 4K video recording in later models. The cameras also include features such as a built-in ND filter, which allows for creative control over exposure, especially in bright conditions. Users can take advantage of the camera's 60p shooting for smooth motion and clarity in video.

Another appealing characteristic of the RX100 series is its compact form factor. With its sleek design, it is ergonomically friendly, making it an excellent choice for travel and street photography. The tilting LCD screens on many models, along with optional electronic viewfinders, increase shooting flexibility and user interaction.

In summary, the Sony RX100 series blends advanced photography technologies with a compact design. Features like a large sensor, fast lens, quick autofocus, and 4K video recording set it apart from typical compact cameras. Whether capturing breathtaking stills or high-quality video, the RX100 remains a top contender in the compact camera space.