Sony RX100 manual ’#’ 889 004 or *889 10 10 Stop Recording ‘#’

BBV Rx100 Interface Receiver

Addendum to manual for the following domes:

Videcon Dome

Rx100 software RX1_V4V2

Application Notes

The RX 100 provide the following functionality when controlling the above mentioned dome

Variable speed Pan/Tilt.

16 Full scene presets.

2 RX100 preset patrols.

Pattern Tour 1 learn and playback using AUTOPAN Privacy zone support

IR Filter CUT using LIGHTS is link J6/1-2 fitted. Lights ON = FILTER OFF, Lights OFF = FILTER ON

Pattern Tour 1 playback = press AUTOPAN

The dome and Rx100 are linked using RS485 for control and video for the camera signal.

Notes:

The dome switches must be as follows to select Pelco P, 9600 baud and address 1.

SW1, 1 ON, 2-7 OFF. SW2, 1 & 2 ON, Protocol switch 1-4 all OFF

The alarm output relay opens for approx 5 seconds upon power up and following any active alarm input.

When navigating the dome’s menu or privacy setup use the joystick and IRIS OPEN and CLOSE. The dome manual has detailed information on the menu structure and privacy setting.

J6 Links

J6/1-2 fitted to allow LIGHTS to switch the IR CUT filter ON/OFF when used with a day/night dome.