3. INSTALLATION
OPERATING VOLTAGE
The Rx100 requires all connections to the PCB to be made by the installer, and via terminal blocks or by plug and socket. These connections are: power in, video in, video out, and serial data to dome. In addition connections for alarm in, alarm out and lights if required are provided. See fig.2 below for correct connections.
The Rx100 is supplied
IMPORTANT NOTE – If link
Fig. 2 Rx100 Iss6 PCB connections
J6 OPTION LINKS HF Lift
Gain |
| POWER 9 - 12 V AC/DC | |
| 100mA MAX | J4 |
| ||
|
| |
| supply |
|
Twisted Pair IN from | AC | J3 |
AC |
| |
TP | J3 | |
telem transmitter | GND | |
RS485 OUT to dome | TP |
|
C2 |
| |
| C1 |
|
| C3 |
|
N/C Alarm | C4 |
|
AOUT |
| |
OUT | GND |
|
GND |
| |
N/C | AOUT |
|
A1 |
| |
Alarm | GND |
|
A3 |
| |
contacts IN | A2 |
|
A4 |
| |
|
| |
|
| J7 |
5 1 CABLE
ERROR
Test
GAIN |
|
CAMERA | |
J5 | TELEMETRY |
RY1 | NEUTRAL |
| EARTH |
Video In from dome
Video Out to transmitter
Lights Supply
Neutral
Earth
J1
pcb 97002 Iss 6 www.bbvcctv.com
LIVE | Live | |
SW | ||
|
4 Amp 250V MAX
BBV
|
|
|
|
|
|
|
|
|
|
|
|
RS485 to Panasonic domes |
|
| Test Link |
| |
|
|
| |||
Lights Feed
Function | Connector | Type |
| |
Power In | J4 | 2.1mm | coaxial |
|
or | Grey WAGO |
| ||
Video In | CAMERA | BNC SOCKET |
| |
Video Out | TELEMETRY | BNC SOCKET |
| |
Twisted Pair Telemetry |
| Grey WAGO | ||
Serial to dome | Grey WAGO |
| ||
or | J7 | FCC68 | (Fitted for Panasonic versions) | |
Alarm 1 contact in | Grey WAGO | (optional if alarm input required) | ||
Alarm 2 contact in | Grey WAGO | (optional if alarm input required) | ||
Alarm 3 contact in | Grey WAGO | (optional if alarm input required) | ||
Alarm 4 contact in | Grey WAGO | (optional if alarm input required) | ||
Alarm contact out |
| Grey WAGO | (optional if alarm input required) | |
Lighting relay | J5 | Coloured WAGO (optional if lights control required) | ||
(clean contact between orange connectors)
Rx100 installation manual V1.17 29 Aug 08.doc | Page 8 |