2. INTRODUCTION
GENERAL
The Rx100 telemetry interface is designed to allow control of a variety of integrated dome cameras using BBV’s range of
The Rx100 interface is supplied in an IP67 rated enclosure. It will be necessary to make suitable holes in the enclosure to permit cable entry and exit. Adequately rated cable glands and or flexible conduit should be used at all times to avoid compromising the protection afforded by the enclosure as supplied. Any holes made in the enclosure for any other purpose should be sealed with a
Rx100 TECHNICAL SPECIFICATION
Power Requirements: | RX100 | |
| RX100/24 – 24Vac or 230Vac | |
Current Consumption: | RX100 - 100mA @ 12Vdc maximum | |
| RX100/24 – 630mA @ 230Vac maximum | |
Features: | • | Serial data output 2 wire RS485/RS422. |
| • | 4 alarm inputs. |
| • | 1 N/C alarm output. |
| • | Up to 16 |
| • | Relay capable of switching 1Kw of lighting. |
Engineering Facilities: | • | Unit |
| • | LED readout for continual system status. |
| • | Video launch amplifier provided with Gain and Lift controls. |
| • | |
|
| Live, Neutral and Earth and Low Voltage. |
Telemetry Signals: | Telemetry signals either: | |
| • | |
| • or twisted pair | |
Video Input: | 1v | |
Video Output: | 1v | |
Up to 16
Dimensions (external): | RX100/WBX | RX100/24/WBX | |
| Width: | 190 mm Width: | 190mm |
| Length: | 280 mm Length: | 380mm |
| Height: | 130 mm Height: | 130mm |
Weight: | 1.0Kg |
| 3.6Kg |
Temperature range: | |||
Rx100 installation manual V1.17 29 Aug 08.doc | Page 5 |