Chapter 4 Using Your Motion M1200 and M1300 Tablet PCs
ADJUSTING
BRIGHTNESS
FOR DIFFERENT
LIGHTING
SCENARIOS
7.Select OK. The list of actions should now display the new action for the button you reprogrammed. You can always Reset the button defaults by tapping Reset on the Tablet Buttons window.
You may want to adjust the brightness level of the Tablet PC display for different lighting situations and for improving battery life.
•From the Motion Dashboard
1.Open the Motion Dash- board.
2.Adjust the desired bright- ness level on the Display Brightness slider.
• From the Tablet and Pen Settings Window
1.
| tem Tray, located in the lower |
| display window. Or, go to the Control Panel and select |
| the Tablet and Pen Settings icon. This opens the Tablet |
| and Pen settings window. |
| 2. Tap the Display tab. |
| 3. Adjust the Brightness slider at the bottom of this window. You can |
| have a different setting when running on AC power versus battery. |
IDENTIFYING | You should run your Tablet PC or Motion |
THE RIGHT AC | |
POWER | The AC Adapter has a distinguishable, |
ADAPTER | only Motion accessory the AC Adapter is compatible with is the |
| FlexDock and the |
| CAUTION: Before you plug an AC adapter into the Tablet PC or into any |
| accessory device, make sure you are using the correct AC power |
| adapter (the one that came with the Tablet PC or the accessory). The |
| Tablet PC has an identifying label attached to the cord of its AC power |
| Adapter. Leave this label attached to ensure you always connect this AC |
| power Adapter only to the Tablet PC. If you connect this adapter to an |
| accessory, you may damage the accessory or the adapter. |