Chapter 4 Using Your Motion M1200 and M1300 Tablet PCs
2.Open the Dashboard and tap Properties under Power Management.
3.Select the Hibernate tab and make sure Hibernate is Enabled (the default).
4.Go to Start>Turn Off Computer.
5.When the Turn Off Computer window appears, press the Shift key on your external keyboard or tap Shift on the Tablet PC Input Panel key- board to change the option from Stand By to Hibernate.
IMPORTANT: You can put the Tablet PC in either Stand By or Hibernate to swap the battery:
•If you choose Stand By, the unit is designed to maintain your system for up to 30 seconds while the battery is swapped. However, you may have less than 30 seconds to swap the battery because of the settings and the programs that you have running. You should save any data before putting the unit in Stand By to swap the battery.
•If you choose Hibernate, you have unlimited time to swap the battery. Hibernate saves the status of the Tablet PC to your Hard Disk Drive so that you can resume operations later.
6.Tap Hibernate or Stand By. The Tablet PC displays that it is Stand- ing By or Hibernating.
7.Wait until the system shuts down and all LEDs are off.
8.Push the battery release latch on the bottom of the Tablet PC to eject the internal battery.
9.Insert the new battery until you hear the latch click, which ensures the new battery is correctly seated.
CAUTION: To avoid damage to the Tablet PC, install only Motion
Computing batteries, which are specially designed for the Tablet PC.
Disposing of Used Batteries
When a Tablet PC battery is no longer serviceable, dispose of it responsibly at a hazardous materials recycling center. Do not toss it in the trash where it will be sent to a landfill.
Battery and Power Management Hints
•Use AC power whenever available to lengthen the battery’s usable life. Leave the battery in place when using AC power.
•Use AC power when installing software or writing to a CD and, for best performance, when using a DVD player.
•When using battery power, if you leave the Tablet PC unattended, place the system in Stand By or Hibernate mode.
•Keep in mind that the display, processor, PC cards, wireless cards, and accessory drives all draw on the battery, so adjust properties and disable unused accessories and PC cards when operating on battery power.
•When running on battery, adjust the power mode and display brightness to lower settings to prolong the battery life.