Deleting or changing an existing system and/or setup password | 23 |
Operating with a setup password enabled | 23 |
Entering the UEFI Boot Manager | 24 |
Using the Boot Manager navigation keys | 24 |
Boot Manager screen | 24 |
UEFI Boot menu | 25 |
Embedded system management | 25 |
iDRAC Settings utility | 25 |
Entering the iDRAC Settings utility | 26 |
Processor core licensing | 26 |
Networking configurations | 26 |
Standard configuration | 26 |
Network adapter isolation configuration | 27 |
Isolated networks configuration | 28 |
4 Installing sled components | 30 |
Recommended tools | 30 |
Removing and installing the sled | 30 |
Removing the sled | 30 |
Installing the sled | 31 |
Inside the sled | 32 |
Cable cover | 33 |
Removing the cable cover | 33 |
Installing the cable cover | 34 |
Cooling shroud | 35 |
Removing the cooling shroud | 35 |
Installing the cooling shroud | 36 |
System memory | 36 |
General memory module installation guidelines | 37 |
Sample memory configurations | 37 |
Removing memory modules | 38 |
Installing memory modules | 39 |
Hard drives/SSDs | 40 |
Hard drive/SSD to node assignment | 40 |
Removing a hard drive/SSD | 41 |
Installing a hard drive/SSD | 43 |
Shutdown procedure for servicing a hard drive/SSD | 43 |
Configuring the boot drive | 44 |
Removing a 2.5 inch hard drive/SSD from a | 44 |
Installing a 2.5 inch hard drive/SSD in a | 44 |
Removing a 1.8 inch SSD from the SSD carrier | 45 |
Installing a 1.8 inch SSD in the SSD carrier | 45 |