Dell FM120x4 owner manual Configuring the boot drive

Page 44

Configuring the boot drive

The drive or device from which the system boots is determined by the boot order specified in the System Setup.

Removing a 2.5 inch hard drive/SSD from a hard-drive/SSD carrier

1.Remove the four screws from the slide rails on the hard-drive/SSD carrier.

2.Lift the hard drive/SSD out of the hard-drive/SSD carrier.

Figure 21. Removing and installing a 2.5 inch hard drive/SSD in a hard-drive/SSD carrier

1.	hard drive/SSD	2.	screw holes (4)
3.	hard-drive/SSD carrier	4.	screws (4)

Installing a 2.5 inch hard drive/SSD in a hard-drive/SSD carrier

1.Insert the hard drive/SSD into the hard-drive/SSD carrier with the connector end of the drive at the back of the carrier.

2.From the back of the carrier, slide the drive into the carrier.

3.Align the screw holes on the hard drive/SSD with the holes on the hard-drive/SSD carrier.

CAUTION: To avoid damaging the drive or the carrier, do not overtighten the screws.

4.Install the four screws to secure the hard drive/SSD to the hard-drive/SSD carrier.

44

Image 44

Contents Regulatory Model E02B Regulatory Type E02B002 Page Contents Installing sled components Using the Boot Manager navigation keys Boot Manager screenTroubleshooting your system Using system diagnosticsJumpers and connectors Technical specificationsGetting help Term Description About your systemTerms used in the document Front-panel features and indicators Hard-drive/SSD indicator patterns Drive-Status Indicator Pattern ConditionNode status indicators Indicator Pattern Description OffSolid blue Blinking blueUsing USB diskette or USB DVD/CD drives Documentation matrixQuick Resource Locator Setting up and configuring the iDRAC IP address Performing initial system configurationSetting up your system Logging in to iDRAC Installing the operating system Click Get drivers and downloadsUsing the System Setup and Boot Manager Choosing the system boot modeEntering System Setup System setup optionsResponding to error messages Using the System Setup navigation keysSystem Bios screen System Information screenSata Settings screen Memory Settings screenProcessor Settings screen Serial Communications screen Boot Settings screenIntegrated Devices screen System Profile Settings screen System Security screen System and setup password featuresMiscellaneous settings Assigning a system and/or setup password Using your system password to secure your system Operating with a setup password enabledBoot Manager screen Entering the Uefi Boot ManagerUsing the Boot Manager navigation keys IDRAC Settings utility Embedded system managementNetworking configurations Entering the iDRAC Settings utilityStandard configuration System Setup Main Menu page, click iDRAC SettingsNetwork adapter isolation configuration Icon DescriptionIsolated networks configuration Network adapter isolation configurationTrunk configuration or LAG Installing sled components Removing and installing the sledRecommended tools Removing the sledInstalling the sled Removing and installing a sledInside the sled Inside the sled 2.5 inch hard-drive/SSD systemCable cover Removing the cable coverInstalling the cable cover Removing and installing the cable coverCooling shroud Removing the cooling shroudInstalling the cooling shroud System memoryDimm Type DIMMs Populated Per Maximum Dimm Rank PerGeneral memory module installation guidelines Sample memory configurationsRemoving memory modules Number Organization Dimm Slot Population DIMMs SpeedInstalling memory modules Removing the memory moduleHard drives/SSDs Hard drive/SSD to node assignmentRemoving a hard drive/SSD Hard-Drive/SSD Bay NodeHard-drive/SSD carrier handle Installing a hard drive/SSD Shutdown procedure for servicing a hard drive/SSDConfiguring the boot drive Removing a 1.8 inch SSD from the SSD carrier Installing a 1.8 inch SSD in the SSD carrierHard-drive/SSD backplane Removing and installing the hard-drive/SSD backplane Removing the hard-drive/SSD backplaneRemoving the SSD cage assembly SSD cage assemblyInstalling the hard-drive/SSD backplane Replacing the easy restore module Easy restore moduleInstalling the SSD cage assembly System battery Replacing the system batterySystem board Removing the system boardPage Installing the system board Removing and installing the system boardControl panel Removing the control panelInstalling the control panel Removing and installing the control panelPage Troubleshooting your system Troubleshooting hard drives Troubleshooting USB devicesTroubleshooting the system board Troubleshooting the system batteryAlert messages Diagnostic messagesSystem messages Using system diagnostics Dell Embedded System DiagnosticsWhen to use the Embedded System Diagnostics Running the Embedded System DiagnosticsSystem diagnostic controls Least one event description is recordedJumpers and connectors System board jumper settingsJumper Setting Description Configuration settings are retained at system bootSystem board connectors Connector DescriptionDisabling a forgotten password Technical specifications Battery Environmental Expanded operating temperatureTemperature Temperature Continuous OperationMaximum Vibration Maximum ShockMaximum Altitude Operating Altitude De-ratingGaseous Contamination Quick Resource Locator Locating your system Service Tag Getting helpContacting Dell Documentation feedback