
& + $ 3 7 ( 5
5HPRYLQJDQG5HSODFLQJ3DUWV
This chapter provides procedures for removing the components, assemblies, and subassemblies in the computer. Unless otherwise noted, each procedure assumes the following:
‡You have performed the steps in “Precautionary Measures” found later in this chapter.
‡You have opened the top panel doors, opened the front bezel door, and/or removed the front bezel as necessary.
‡You can replace or reinstall a part by performing the removal procedure in
GLVFRQQHFWHGFDEO3RZU(GJH:FRYHUWUDLQHGYROWDJHV:$$51,1*51,1*DQGDFVHUYLFWFKQLFLDQVDUHDQGQHFWV7KH7KHFHQUJ\KD]DUGVVVDQ\RIWRSRZHUSRZHUV\VWHPKHVXSSOLHVVXSSO\WKHFRQQHFWVUHFHSWDFOHFRPSRQHQWVSDUDOOHOLQJZKLFKDXWLQWRLVRUL]HGFDQFDLYHFRPSWDW$LQVLGWKHWKHERDUG&WRXSRZHUVHEDFNUHPRYHERGLO\V\VW363%LQRI7KHFRPSXWHUWKHKSURGXFH$DUP&FKDVVLVFRPSXWHUWKHURXWLQJ2QO\KLJKDGQ | |||
reverse order unless additional information is provided. | |||
UXQVDO | WKHOHIVLGHRIWKH | WR | 363%%HIRUHUHPRYLJ |
RUVHUYLFLQJWKHV\VHPWKHLWLVFULLFDOFRPSXWHUWRPDNHFHUWDLQWKDW$&SRZHULV
IURP EDFNRIKHV\VWHP
5HFRPPHQGHG7RROV
The PowerEdge 6350 system has been designed for greater manual service- ability; most of the procedures in this chapter do not require the use of tools. Exceptions are as follows:
‡Removing/replacing the processor guide bracket assemblies requires a T25 Torx driver.
‡Removing the PSPB requires a #1 Phillips-head screwdriver.
‡Removing/replacing the SCSI backplane, auxiliary SCSI backplane, or diskette drive requires a #2
Also, use a wrist grounding strap as explained in the next section, “Precautionary Measures.”
Removing and Replacing Parts |