Dell 6350 manual Vwhpdq$Vvhpeo

6\VWHP￿)DQ￿$VVHPEO\￿

fan assembly	fan assembly
	grip slot
	(release lever
	inside the slot)

)LJXUH

The four-fan cooling assembly is mounted in the middle of the chassis behind

H[FHHGLQVWDOO&the$87,21powerDUHSODFPHQWPLQXW￿supplies<RXFDQHVZKLOHandKRWtheDVVHPEO\￿SOXJUHSODFLQJdriveWKHbays￿IDQ,I.WKHDVVHPEO\IDQV\VWHPDVVHPEO\RQO\LVUXQQLQJLI￿\RX￿LPPHGLDWHO\GRQRW

The fan assembly is hot-pluggable, which means that you can remove the entire fan assembly and replace it with another entire fan assembly while the system is running.

To remove the fan assembly, follow these steps:

1.Make sure the right top door is unlocked.

2.Grasp the recessed grip slot at the top of the fan assembly, press in on the release lever inside the slot, and lift the fan assembly from the system (see Figure 4-12).

To install a fan assembly, slide the assembly down into place as shown, making sure that the electrical connector in the bottom of the assembly is fully seated in its PSPB connector. To ensure a complete connection, the top of the fan assembly must be flush with or below the adjacent top panel doors.

Removing and Replacing Parts 4-15