Dell 6350 manual LJXUH7HUPLQDWRU, 7HUPLQDWRU&DUWULGJH

7HUPLQDWRU￿&DUWULGJH

terminator cartridge

)LJXUH￿￿￿￿￿7HUPLQDWRU	release
	latches (2)
guide bracket
assembly

To remove a terminator cartridge, follow these steps:

1.Press outward on the two SEC cartridge release latches until they snap into the open position (see Figure 4-19).

2.Pull the terminator cartridge straight up out of the connector and guide bracket assembly (some force may be required).

To install a terminator cartridge, make sure the cartridge release latches are in the open position, orient the terminator cartridge in the guide bracket assem- bly as shown in Figure 4-19, seat it firmly, and then snap the release latches back into place.

Removing and Replacing Parts 4-23