Dell 3000i manual Attaching MD1000 Expansion Enclosures

Page 15

Figure 2-5. Up to 16 Dual SAN-Configured Servers, Dual-Path Data, Dual Controllers (Duplex)

1

2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

up to 16 standalone

2

IP SAN (dual Gigabit

3 Ethernet

 

host servers

 

 

 

Ethernet switches)

management port

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(2)

4

MD3000i RAID

5

corporate, public or

 

 

Enclosure (dual

 

 

 

private network

 

 

controllers)

 

 

 

 

 

 

 

 

 

Attaching MD1000 Expansion Enclosures

One of the features of the MD3000i is the ability to add up to two MD1000 expansion enclosures for additional capacity. This expansion increases the maximum physical disk pool to 45 3.5" SAS and/or SATA II physical disks.

As described in the following sections, you can expand with either a brand new MD1000 or an MD1000 that has been previously configured in a direct-attach solution with a PERC 5/E system.

NOTICE: Ensure that all MD1000 expansion enclosures being connected to the MD3000i are first updated to the latest Dell MD1000 EMM Firmware (available from support.dell.com). Dell MD1000 EMM Firmware versions prior to A03 are not supported in an MD3000i array; attaching an MD1000 with unsupported firmware causes an uncertified condition to exist on the array. See the following procedure for more information.

Hardware Installation

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Systems Installation Guide February Contents Configuring iSCSI on your Storage Array If you are using Windows Server 2008 Core VersionIf you are using Rhel 5 or Sles 10 SP1 Guidelines for Configuring Your Network for iSCSI Contents Introduction IntroductionSystem Requirements Management Station Hardware RequirementsIntroduction to Storage Arrays Hardware Installation Storage Configuration PlanningAbout the Enclosure Connections Direct-Attached Solutions Cabling the EnclosureRedundancy vs. Nonredundancy Private network Controller Hardware Installation Two-node cluster Ethernet Two host serverMD3000i RAID Four host server Port ControllersCorporate, public or private network Enclosure dual Private network Controllers Network-Attached SolutionsIP SAN Gigabit Ethernet Host servers Ethernet switch Attaching MD1000 Expansion Enclosures Expanding with Previously Configured MD1000 Enclosures Expanding with New MD1000 Enclosures Hardware Installation Software Installation System Assembly and StartupSoftware Installation To install the iSCSI initiator after Rhel 4 installation Installing the iSCSI Initiator on a Windows Host ServerInstalling the iSCSI Initiator on a Linux Host Server To install the iSCSI initiator during Rhel 4 installationTo install the iSCSI initiator after Rhel 5 installation To install the iSCSI initiator during Rhel 5 installationTo install the iSCSI initiator after Sles 9 installation To install the iSCSI initiator during Sles 9 installationInstalling MD Storage Software Software Installation Command to manually mount CD is When the installation completes, click Done Installing a Dedicated Management Station Windows and Linux Viewing Resource CD Contents Installing the ManualsDocumentation for Windows Systems Insert the CD Documentation for Linux SystemsInstalling the Manuals Array Setup and iSCSI Configuration Before You StartTerminology Target ISCSI Configuration WorksheetManagement station Storage arrayISCSI controller 1, SubnetDefault gateway Setting Up Your iSCSI Storage ArrayStatic IP address storage array ISCSI controller 0,Target Chap MD3000iUsing iSNS Configuring iSCSI on Your Storage ArrayArray Manual Storage Array Discovery Default Management Port SettingsDiscover the Storage Array Out-of-band management only Automatic Storage Array DiscoverySet Up the Array Ethernet Management Ports, then Initial Setup Tasks→ ConfigureUpdate your management station Addresses on each controllerConfigure the iSCSI Ports on the Storage Array If you are using Windows Server 2008 Core Version Start the iSCSI service sc start msiscsiPerform Target Discovery from the iSCSI Initiator If you are using Linux Server Etc/init.d/iscsi restart If you are using Rhel 5 or Sles 10 SP1Iscsiadm -m node -T initiatorusername -p targetip -u Configure Host Access Mutual Chap Understanding Chap AuthenticationWhat is CHAP? Target ChapHow Chap Is Set Up Chap DefinitionsChap Types Defined Description Configure Chap Authentication on the Storage Array optional Configuring Target Chap Authentication on the Storage ArrayChap Settings Selection Description None Configuring Mutual Chap Authentication on the Storage Array Configure Chap Authentication on the Host Server optional IPaddressofiSCSIportonstoragearray CHAPusername CHAPpassword Setting Up Your iSCSI Storage Array If you are using Rhel 5 or Sles 10 SP1 If you are using SLES10 SP1 via the GUI Connect to the Target Storage Array from the Host Server TCPPortNumberOfTargetPortal is Iscsicli SessionList If you are using a Linux ServerViewing the status of your iSCSI connections Optional Set Up In-Band Management Troubleshooting Tools Premium FeaturesSetting Up Your iSCSI Storage Array Uninstalling Software Uninstalling From WindowsUninstalling Software Uninstalldellmdstoragemanager and press Enter Uninstalling From LinuxGuidelines for Configuring Your Network for iSCSI Windows Host SetupNetwork Configuration Guidelines Linux Host Setup NETWORKING=yes HOSTNAME=mymachine.mycompany.com Configuring TCP/IP on Linux using Dhcp root users onlyNetwork Configuration Guidelines Index Linux, 64 static IP, 63 WinsIndex RAID

3000i specifications

The Dell 3000i is a powerful and versatile storage solution designed to meet the needs of modern businesses. Known for its flexibility and efficiency, this entry-level storage array offers a range of features that cater to small to medium enterprises and branch offices, providing them with reliable, scalable, and high-performance data management capabilities.

One of the standout features of the Dell 3000i is its impressive performance. It is powered by Dell's proprietary technology, enabling it to handle various workloads with ease. With support for both block and file storage, the 3000i allows organizations to streamline their data operations and optimize their storage strategies. This flexibility means that regardless of the specific requirements, users can manage their data efficiently and effectively.

The Dell 3000i supports multiple connectivity options, including iSCSI and Fibre Channel, ensuring that it can be integrated seamlessly into existing IT environments. This versatility allows organizations to leverage their current infrastructure while capitalizing on the advanced capabilities of the 3000i. Additionally, it features a modular architecture, enabling users to scale their storage incrementally as their needs grow. This means businesses can start with a small footprint and expand their storage capacity without any disruption.

Data protection is a critical concern for all organizations, and the Dell 3000i addresses this with advanced RAID configurations, which safeguard data against hardware failures. Furthermore, it includes features such as snapshots and remote replication, allowing businesses to implement robust disaster recovery solutions. These capabilities ensure that data remains safe and accessible, even in the event of unexpected incidents.

Another notable characteristic of the Dell 3000i is its management interface. The system is equipped with an intuitive and user-friendly management console that simplifies administrative tasks. This console provides real-time insights into performance metrics, storage utilization, and system health, enabling IT administrators to make informed decisions quickly.

In conclusion, the Dell 3000i stands out as a reliable and efficient storage solution for organizations seeking to enhance their operational capabilities. With its high performance, flexibility, and robust data protection features, it effectively supports the growing data demands of today’s digital landscape. Businesses looking for a storage system that can evolve with their needs will find the Dell 3000i to be a compelling choice, combining advanced technology with user-friendly management for optimal data handling.
Top Page Image Contents