Dell 3000i manual Uninstalling Software, Uninstalling From Windows

Page 61

Uninstalling Software

The following sections contain information on how to uninstall MD Storage Manager software from both host and management station systems.

Uninstalling From Windows

Use the Change/Remove Program feature to uninstall MD Storage Manager from a Microsoft® Windows® operating systems other than Windows Server 2008:

1From the Control Panel, double-click Add or Remove Programs.

2Select MD Storage Manager from the list of programs.

3Click Change/Remove, and follow the prompts to complete the uninstallation process. The Uninstall Complete window appears.

4Select Yes to restart the system, and then click Done.

Use the following procedure to uninstall MD Storage Manager on Windows Server® 2008 GUI versions:

1From the Control Panel, double-click Programs and Features.

2Select MD Storage Manager from the list of programs.

3Click Uninstall/Change, then follow the prompts to complete the uninstallation process. The Uninstall Complete window appears.

4Select Yes to restart the system, then click Done.

Use the following procedure to uninstall MD Storage Manager on Windows Server 2008 Core versions:

1Navigate to the \Program Files\Dell\MD Storage Manager\Uninstall Dell_MD_Storage_Manager directory.

NOTE: By default, MD Storage Manager is installed in the \Program Files\Dell\MD Storage Manager directory. If another directory was used during installation, navigate to that directory before beginning the uninstall procedure.

2From the installation directory, type (command is case sensitive):

Uninstall Dell_MD_Storage_Manager and press Enter.

Uninstalling Software

61

Image 61

Contents Systems Installation Guide February Contents If you are using Windows Server 2008 Core Version Configuring iSCSI on your Storage ArrayIf you are using Rhel 5 or Sles 10 SP1 Guidelines for Configuring Your Network for iSCSI Contents System Requirements IntroductionManagement Station Hardware Requirements IntroductionIntroduction to Storage Arrays Storage Configuration Planning Hardware InstallationAbout the Enclosure Connections Cabling the Enclosure Direct-Attached SolutionsRedundancy vs. Nonredundancy Two-node cluster Ethernet Two host server Private network Controller Hardware InstallationMD3000i RAID Controllers Four host server PortCorporate, public or private network Enclosure dual Private network Controllers Network-Attached SolutionsIP SAN Gigabit Ethernet Host servers Ethernet switch Attaching MD1000 Expansion Enclosures Expanding with Previously Configured MD1000 Enclosures Expanding with New MD1000 Enclosures Hardware Installation System Assembly and Startup Software InstallationSoftware Installation Installing the iSCSI Initiator on a Linux Host Server Installing the iSCSI Initiator on a Windows Host ServerTo install the iSCSI initiator during Rhel 4 installation To install the iSCSI initiator after Rhel 4 installationTo install the iSCSI initiator after Rhel 5 installation To install the iSCSI initiator during Rhel 5 installationTo install the iSCSI initiator after Sles 9 installation To install the iSCSI initiator during Sles 9 installationInstalling MD Storage Software Software Installation Command to manually mount CD is When the installation completes, click Done Installing a Dedicated Management Station Windows and Linux Installing the Manuals Viewing Resource CD ContentsDocumentation for Windows Systems Insert the CD Documentation for Linux SystemsInstalling the Manuals Before You Start Array Setup and iSCSI ConfigurationTerminology Management station ISCSI Configuration WorksheetStorage array TargetStatic IP address storage array SubnetDefault gateway Setting Up Your iSCSI Storage ArrayISCSI controller 0, ISCSI controller 1,Target Chap MD3000iConfiguring iSCSI on Your Storage Array Using iSNSArray Discover the Storage Array Out-of-band management only Default Management Port SettingsAutomatic Storage Array Discovery Manual Storage Array DiscoverySet Up the Array Update your management station Initial Setup Tasks→ ConfigureAddresses on each controller Ethernet Management Ports, thenConfigure the iSCSI Ports on the Storage Array Start the iSCSI service sc start msiscsi If you are using Windows Server 2008 Core VersionPerform Target Discovery from the iSCSI Initiator If you are using Linux Server Etc/init.d/iscsi restart If you are using Rhel 5 or Sles 10 SP1Iscsiadm -m node -T initiatorusername -p targetip -u Configure Host Access What is CHAP? Understanding Chap AuthenticationTarget Chap Mutual ChapChap Definitions How Chap Is Set UpChap Types Defined Description Configuring Target Chap Authentication on the Storage Array Configure Chap Authentication on the Storage Array optionalChap Settings Selection Description None Configuring Mutual Chap Authentication on the Storage Array Configure Chap Authentication on the Host Server optional IPaddressofiSCSIportonstoragearray CHAPusername CHAPpassword Setting Up Your iSCSI Storage Array If you are using Rhel 5 or Sles 10 SP1 If you are using SLES10 SP1 via the GUI Connect to the Target Storage Array from the Host Server TCPPortNumberOfTargetPortal is Iscsicli SessionList If you are using a Linux ServerViewing the status of your iSCSI connections Optional Set Up In-Band Management Troubleshooting Tools Premium FeaturesSetting Up Your iSCSI Storage Array Uninstalling From Windows Uninstalling SoftwareUninstalling Software Uninstalldellmdstoragemanager and press Enter Uninstalling From LinuxWindows Host Setup Guidelines for Configuring Your Network for iSCSINetwork Configuration Guidelines Linux Host Setup NETWORKING=yes HOSTNAME=mymachine.mycompany.com Configuring TCP/IP on Linux using Dhcp root users onlyNetwork Configuration Guidelines Linux, 64 static IP, 63 Wins IndexIndex RAID