Dell 3000i manual When the installation completes, click Done

Page 26

3At the CD main menu, type 2 and press Enter. The installation wizard appears.

4Click Next.

5Accept the terms of the License Agreement and click Next.

6Select an installation type:

Typical (Full installation) — This package installs both the management station and host options. It includes the necessary host-based storage agent, multipath driver, and MD Storage Manager software. Select this option if you plan to use MD Storage Manager on the host server to configure, manage, and monitor the storage array.

OR

Host — This package installs the necessary storage agent and multipath driver on a host server connected to the storage array. Select this option on all hosts that are connected to a storage array but will NOT use MD Storage Manager for any storage array management tasks.

7Click Next.

8If the Overwrite Warning dialog appears, click OK. The software currently being installed automatically replaces any existing versions of MD Storage Manager.

9The Multipath Warning dialog box may appear to advise that this installation requires an RDAC MPP driver. If this screen appears, click OK. Installation instructions for the RDAC MPP driver are given in step 13.

10If you selected Typical (full) installation in step 6, a screen appears asking whether to restart the event monitor automatically or manually after rebooting. You should configure only one system (either a host or a management station) to automatically restart the event monitor.

NOTE: The event monitor notifies the administrator of problem conditions with the storage array. MD Storage Manager can be installed on more than one system, but running the event monitor on multiple systems can cause multiple alert notifications to be sent for the same error condition. To avoid this issue, enable the event monitor only on a single system which monitors your MD3000i arrays. For more information on alerts, the event monitor, and manually restarting the event monitor, see the User’s Guide.

11The Pre-Installation Summary screen appears showing the installation destination, the required disk space, and the available disk space. If the installation path is correct, click Install.

12When the installation completes, click Done.

13At the install the multi-pathing driver [y/n]? prompt, answer y (yes).

14When the RDAC driver installation is complete, quit the menu and restart the system.

15Install MD Storage Manager on all other hosts attached to the MD3000i array.

16Reboot each host attached to the array.

26

Software Installation

Image 26
Contents Systems Installation Guide February Contents If you are using Rhel 5 or Sles 10 SP1 Configuring iSCSI on your Storage ArrayIf you are using Windows Server 2008 Core Version Guidelines for Configuring Your Network for iSCSI Contents Management Station Hardware Requirements IntroductionSystem Requirements IntroductionIntroduction to Storage Arrays About the Enclosure Connections Hardware InstallationStorage Configuration Planning Redundancy vs. Nonredundancy Direct-Attached SolutionsCabling the Enclosure MD3000i RAID Private network Controller Hardware InstallationTwo-node cluster Ethernet Two host server Corporate, public or private network Four host server PortControllers Network-Attached Solutions Enclosure dual Private network ControllersIP SAN Gigabit Ethernet Host servers Ethernet switch Attaching MD1000 Expansion Enclosures Expanding with Previously Configured MD1000 Enclosures Expanding with New MD1000 Enclosures Hardware Installation Software Installation Software InstallationSystem Assembly and Startup To install the iSCSI initiator during Rhel 4 installation Installing the iSCSI Initiator on a Windows Host ServerInstalling the iSCSI Initiator on a Linux Host Server To install the iSCSI initiator after Rhel 4 installationTo install the iSCSI initiator during Rhel 5 installation To install the iSCSI initiator after Rhel 5 installationTo install the iSCSI initiator during Sles 9 installation To install the iSCSI initiator after Sles 9 installationInstalling MD Storage Software Software Installation Command to manually mount CD is When the installation completes, click Done Installing a Dedicated Management Station Windows and Linux Documentation for Windows Systems Viewing Resource CD ContentsInstalling the Manuals Documentation for Linux Systems Insert the CDInstalling the Manuals Terminology Array Setup and iSCSI ConfigurationBefore You Start Storage array ISCSI Configuration WorksheetManagement station TargetISCSI controller 0, SubnetDefault gateway Setting Up Your iSCSI Storage ArrayStatic IP address storage array ISCSI controller 1,MD3000i Target ChapArray Using iSNSConfiguring iSCSI on Your Storage Array Automatic Storage Array Discovery Default Management Port SettingsDiscover the Storage Array Out-of-band management only Manual Storage Array DiscoverySet Up the Array Addresses on each controller Initial Setup Tasks→ ConfigureUpdate your management station Ethernet Management Ports, thenConfigure the iSCSI Ports on the Storage Array Perform Target Discovery from the iSCSI Initiator If you are using Windows Server 2008 Core VersionStart the iSCSI service sc start msiscsi If you are using Linux Server If you are using Rhel 5 or Sles 10 SP1 Etc/init.d/iscsi restartIscsiadm -m node -T initiatorusername -p targetip -u Configure Host Access Target Chap Understanding Chap AuthenticationWhat is CHAP? Mutual ChapChap Types Defined Description How Chap Is Set UpChap Definitions Chap Settings Selection Description None Configure Chap Authentication on the Storage Array optionalConfiguring Target Chap Authentication on the Storage Array Configuring Mutual Chap Authentication on the Storage Array Configure Chap Authentication on the Host Server optional IPaddressofiSCSIportonstoragearray CHAPusername CHAPpassword Setting Up Your iSCSI Storage Array If you are using Rhel 5 or Sles 10 SP1 If you are using SLES10 SP1 via the GUI Connect to the Target Storage Array from the Host Server TCPPortNumberOfTargetPortal is If you are using a Linux Server Iscsicli SessionListViewing the status of your iSCSI connections Optional Set Up In-Band Management Premium Features Troubleshooting ToolsSetting Up Your iSCSI Storage Array Uninstalling Software Uninstalling SoftwareUninstalling From Windows Uninstalling From Linux Uninstalldellmdstoragemanager and press EnterNetwork Configuration Guidelines Guidelines for Configuring Your Network for iSCSIWindows Host Setup Linux Host Setup Configuring TCP/IP on Linux using Dhcp root users only NETWORKING=yes HOSTNAME=mymachine.mycompany.comNetwork Configuration Guidelines Index IndexLinux, 64 static IP, 63 Wins RAID

3000i specifications

The Dell 3000i is a powerful and versatile storage solution designed to meet the needs of modern businesses. Known for its flexibility and efficiency, this entry-level storage array offers a range of features that cater to small to medium enterprises and branch offices, providing them with reliable, scalable, and high-performance data management capabilities.

One of the standout features of the Dell 3000i is its impressive performance. It is powered by Dell's proprietary technology, enabling it to handle various workloads with ease. With support for both block and file storage, the 3000i allows organizations to streamline their data operations and optimize their storage strategies. This flexibility means that regardless of the specific requirements, users can manage their data efficiently and effectively.

The Dell 3000i supports multiple connectivity options, including iSCSI and Fibre Channel, ensuring that it can be integrated seamlessly into existing IT environments. This versatility allows organizations to leverage their current infrastructure while capitalizing on the advanced capabilities of the 3000i. Additionally, it features a modular architecture, enabling users to scale their storage incrementally as their needs grow. This means businesses can start with a small footprint and expand their storage capacity without any disruption.

Data protection is a critical concern for all organizations, and the Dell 3000i addresses this with advanced RAID configurations, which safeguard data against hardware failures. Furthermore, it includes features such as snapshots and remote replication, allowing businesses to implement robust disaster recovery solutions. These capabilities ensure that data remains safe and accessible, even in the event of unexpected incidents.

Another notable characteristic of the Dell 3000i is its management interface. The system is equipped with an intuitive and user-friendly management console that simplifies administrative tasks. This console provides real-time insights into performance metrics, storage utilization, and system health, enabling IT administrators to make informed decisions quickly.

In conclusion, the Dell 3000i stands out as a reliable and efficient storage solution for organizations seeking to enhance their operational capabilities. With its high performance, flexibility, and robust data protection features, it effectively supports the growing data demands of today’s digital landscape. Businesses looking for a storage system that can evolve with their needs will find the Dell 3000i to be a compelling choice, combining advanced technology with user-friendly management for optimal data handling.