Rebooting a WatchGuard SOHO
2Click System Administration.
The System Administration menu appears.
3Select Remote Logging.
The Secure Remote Logging page appears.
4Check the box labeled Enable Remote Logging.
5Enter the IP address of the WatchGuard log server that will be your remote secure log host.
6In the Pass Phrase field, enter a pass phrase that will serve as a password to gain access to the log server.
7In the Retype Phrase field,
8Click Submit.
This transmits your new user and log names to WatchGuard.
Rebooting a WatchGuard SOHO
To reboot a SOHO located on a local system, use one of the following methods:
•Using your Web browser, go to http://192.168.111.1, click System Information, then click Features and Version Information. Click the Reboot button
•Unplug the SOHO and plug it back in
To reboot a SOHO located on a remote system, the SOHO must be configured to allow either incoming Web or FTP traffic to the private, internal address of the SOHO. For information on configuring a SOHO to allow incoming traffic, see “Allowing incoming services” on page 35
You can than use one of the following methods:
•Open a special HTML page with the public, external SOHO IP address in the URL followed by /rebootreq. For example, http://209.191.160.60/rebootreq.
User Guide 2.3 | 55 |