Troubleshooting installation and network configuration
5Click Reboot and wait for the SOHO to finish rebooting. The MODE and ON light flash at different times during boot, which takes about a minute.
How do I change to a static private IP address?
Before you can use a static IP address, you must have a base Private IP address and subnet mask.
The following IP address ranges and subnet masks are set aside for private networks in compliance with RFC 1918. Replace the X in the network IP address with a number between 1 and 254. The subnet addresses do not need to be changed.
Network IP range | Subnet mask |
10.x.x.x255.0.0.0
172.16.x.x255.240.0.0
192.168.x.x255.255.0.0
To change to a static private IP address:
1Using your Web browser, go to http://192.168.111.1.
2Click Private Network, and disable the checkbox labeled Enable DHCP Server.
3Enter the information in the appropriate fields. Click Submit.
4Click Reboot and wait for the SOHO to finish rebooting. The MODE light on the front of the SOHO will turn off, then back on.
How do I allow any incoming service?
With the SOHO, you can allow any incoming service but doing this opens your network to the public.
User Guide 2.3 | 27 |