Packard Bell GX manual Separate the metal bracket and the hard disk drive

Page 12

11

3. Pull the plastic tab on the hard disk drives towards you to disconnect the drives.

Fig. 17 Disconnecting the hard disk drives.

4.Take the drives out of the bay.

5.Remove the four screws (Phillips-head) on the metal bracket holding the hard disk drive.

Fig. 18 Location of the hard disk drive bracket screws.

6. Separate the metal bracket and the hard disk drive.

Fig. 19 Separating the hard disk drive from the bracket.

Packard Bell iPower GX Disassembly Manual

Image 12

Contents IPower GX Table of Contents Disassembly ReassemblyAbout This Guide For More Information Technician NotesPower Supply Unit Hazardous VoltageAvoid Electrostatic Discharge Battery MemoryCPU Heat Sink Opening the CPU bay coverCPU Wireless LAN Adapter Releasing the CPU screwCarefully disconnect the two WiFi antenna cables RTC Battery Removing the wireless LAN adapterHard Disk Drive Location of the hard disk drive bay cover screwsSeparate the metal bracket and the hard disk drive DVD Drive Removing the DVD drive screw coverKeyboard Cover Location of the keyboard cover screwsPower Button Board Volume Control BoardLocation of the volume control board Multimedia BoardKeyboard Releasing the multimedia boardLCD Bezel Releasing the keyboard flat cableInverter WebcamLCD Assembly Removing the webcam moduleDisconnecting the Wlan antenna cables LCD PanelLCD Panel Hinges Top CoverReleasing the touchpad flat cable Touchpad Board Removing the top coverDisconnecting the touchpad flat cable Touchpad Button BoardBluetooth Fingerprint ReaderDisconnecting the Bluetooth cable ModemSpeaker Assembly Removing the modemLocation of the speaker assembly screws Main BoardRemove the modem cable from the main board retaining clips GPU Heat Sink Location of the main board screwsModem Jack / USB Board Location of the GPU heat sink screwsSystem Fan Extracting the modem jack / USB board screwIPower GX Disassembly Manual