Packard Bell GX manual Carefully disconnect the two WiFi antenna cables

Page 9

3. Carefully disconnect the two WiFi antenna cables.

Fig. 11 Disconnecting the wireless LAN antenna cables.

Note: There are two WiFi antenna cables connected to the wireless LAN adapter. Take note of which coloured wire is connected to which connector on the adapter.

4. Remove the screws securing the wireless LAN adapter; it will eject upwards.

Fig. 12 Location of the wireless LAN adapter screw.

Packard Bell iPower GX Disassembly Manual

Image 9

Contents IPower GX Table of Contents Reassembly DisassemblyAbout This Guide For More Information Technician NotesPower Supply Unit Hazardous VoltageAvoid Electrostatic Discharge Memory Battery Opening the CPU bay cover CPU Heat SinkCPU Releasing the CPU screw Wireless LAN AdapterCarefully disconnect the two WiFi antenna cables Removing the wireless LAN adapter RTC BatteryLocation of the hard disk drive bay cover screws Hard Disk DriveSeparate the metal bracket and the hard disk drive Removing the DVD drive screw cover DVD DriveLocation of the keyboard cover screws Keyboard CoverVolume Control Board Power Button BoardMultimedia Board Location of the volume control boardReleasing the multimedia board KeyboardReleasing the keyboard flat cable LCD BezelWebcam InverterRemoving the webcam module LCD AssemblyLCD Panel Disconnecting the Wlan antenna cablesTop Cover LCD Panel HingesReleasing the touchpad flat cable Removing the top cover Touchpad BoardTouchpad Button Board Disconnecting the touchpad flat cableFingerprint Reader BluetoothModem Disconnecting the Bluetooth cableRemoving the modem Speaker AssemblyMain Board Location of the speaker assembly screwsRemove the modem cable from the main board retaining clips Location of the main board screws GPU Heat SinkLocation of the GPU heat sink screws Modem Jack / USB BoardExtracting the modem jack / USB board screw System FanIPower GX Disassembly Manual