Packard Bell GX manual Speaker Assembly, Removing the modem

Page 28

27

2. Remove the modem from the main board.

Fig. 64 Removing the modem.

3. Turn the modem over and unplug the cable from the header on the modem.

Fig. 65 Releasing the modem cable.

Speaker Assembly

To remove the speaker assembly, first remove the top cover (see Top Cover on page 21) and then perform the following steps:

1. Disconnect the speaker cable connector from the header on the main board.

Fig. 66 Disconnecting the speaker cable.

Packard Bell iPower GX Disassembly Manual

Image 28

Contents IPower GX Table of Contents Disassembly ReassemblyAbout This Guide For More Information Technician NotesHazardous Voltage Power Supply UnitAvoid Electrostatic Discharge Battery MemoryCPU Heat Sink Opening the CPU bay coverCPU Wireless LAN Adapter Releasing the CPU screwCarefully disconnect the two WiFi antenna cables RTC Battery Removing the wireless LAN adapterHard Disk Drive Location of the hard disk drive bay cover screwsSeparate the metal bracket and the hard disk drive DVD Drive Removing the DVD drive screw coverKeyboard Cover Location of the keyboard cover screwsPower Button Board Volume Control BoardLocation of the volume control board Multimedia BoardKeyboard Releasing the multimedia boardLCD Bezel Releasing the keyboard flat cableInverter WebcamLCD Assembly Removing the webcam moduleDisconnecting the Wlan antenna cables LCD PanelLCD Panel Hinges Top CoverReleasing the touchpad flat cable Touchpad Board Removing the top coverDisconnecting the touchpad flat cable Touchpad Button BoardBluetooth Fingerprint ReaderDisconnecting the Bluetooth cable ModemSpeaker Assembly Removing the modemLocation of the speaker assembly screws Main BoardRemove the modem cable from the main board retaining clips GPU Heat Sink Location of the main board screwsModem Jack / USB Board Location of the GPU heat sink screwsSystem Fan Extracting the modem jack / USB board screwIPower GX Disassembly Manual