Packard Bell GX manual System Fan, Extracting the modem jack / USB board screw

Page 33

32

2. Lift the modem jack / USB board from the notebook.

Fig. 78 Extracting the modem jack / USB board screw.

System Fan

To remove the system fan, first remove the main board (see Main Board on page 28), and then perform the following steps:

1. Remove the screws securing the system fan.

Fig. 79 Location of the system fan screws.

2. Remove the system fan from the notebook.

Fig. 80 Extracting the system fan.

Packard Bell iPower GX Disassembly Manual

Image 33

Contents IPower GX Table of Contents Reassembly DisassemblyAbout This Guide For More Information Technician NotesPower Supply Unit Hazardous VoltageAvoid Electrostatic Discharge Memory BatteryOpening the CPU bay cover CPU Heat SinkCPU Releasing the CPU screw Wireless LAN AdapterCarefully disconnect the two WiFi antenna cables Removing the wireless LAN adapter RTC BatteryLocation of the hard disk drive bay cover screws Hard Disk DriveSeparate the metal bracket and the hard disk drive Removing the DVD drive screw cover DVD DriveLocation of the keyboard cover screws Keyboard CoverVolume Control Board Power Button BoardMultimedia Board Location of the volume control boardReleasing the multimedia board KeyboardReleasing the keyboard flat cable LCD BezelWebcam InverterRemoving the webcam module LCD AssemblyLCD Panel Disconnecting the Wlan antenna cablesTop Cover LCD Panel HingesReleasing the touchpad flat cable Removing the top cover Touchpad BoardTouchpad Button Board Disconnecting the touchpad flat cableFingerprint Reader BluetoothModem Disconnecting the Bluetooth cableRemoving the modem Speaker AssemblyMain Board Location of the speaker assembly screwsRemove the modem cable from the main board retaining clips Location of the main board screws GPU Heat SinkLocation of the GPU heat sink screws Modem Jack / USB BoardExtracting the modem jack / USB board screw System FanIPower GX Disassembly Manual