Packard Bell GX manual Wireless LAN Adapter, Releasing the CPU screw

7

1. Use a flat-blade screwdriver to turn the CPU lock screw 1/4-turn counter-clockwise.

Fig. 9 Releasing the CPU screw.

2. Take out the CPU from the socket.

Fig. 10 Removing the CPU.

Wireless LAN Adapter

To remove the wireless LAN adapter, first remove the battery (see Battery on page 4) and then perform the following steps:

1.Loosen the screws securing the CPU bay cover; the screws cannot be removed (see Fig. 3).

2.Use the thumb notch to lift the bay cover and remove it. Be careful not to break off the tabs located on the end of the cover opposite the thumb notch (see Fig. 4).

Packard Bell iPower GX Disassembly Manual