FastTrak SX4300, SX8300 User Manual
3.When the boot: prompt appears on the bottom of the screen, type acpi=oldboot into the lower input box.
4.Press the left Alt key and insert the FastTrak driver diskette into the floppy drive.
5.Finish the installation normally.
Install Driver in an Existing System
1.Insert the FastTrak driver diskette into the floppy drive.
2.Type the following commands:
#mount /dev/fd0 /media /floppy
#cd /media /floppy
#./install
#insmod FastTrak
#umount /media /floppy
3.Remove the FastTrak driver diskette from the floppy drive.
34