VTrak J610s, J310s Product Manual
|
|
| State |
|
| |
LEDs |
|
|
|
|
| |
Dark | Steady | Flashing | Amber | Red | ||
| ||||||
| Green | Green | ||||
|
|
|
| |||
|
|
|
|
|
| |
Power | System Off | Normal |
|
|
| |
|
|
|
|
|
| |
FRU* | System Off | Normal |
| 1 CU and/or | 2 CU and/or | |
| 1 PSU failed | 2 PSU failed | ||||
|
|
|
| |||
|
|
|
|
|
| |
I/O Module | No Activity |
| Activity |
|
| |
1 or 2 |
|
|
|
|
| |
Heartbeat | System Off |
| Normal** |
|
| |
|
|
|
|
|
|
* Field Replacement Unit: Cooling Unit (CU) or Power Supply Unit (PSU) ** Blinks intermittently.
Drive Status Indicators
After a few moments the Power/Activity should display Green.
If there is no disk drive in the carrier, the Disk Status LED and the Power/Activity LED will remain dark.
Figure 2. VTrak J610s/J310s disk carrier LEDs
Disk Status
Power/Activity
The VTrak spins up the disk drives sequentially in order to equalize power draw during
If you have SATA disk drives installed without an AAMUX adapter (see page 16), the Power/Activity LED behavior depends on the specific disk drive.
The Disk Status LED behavior depends on your HBA or RAID controller. See the table below.
30