Promise Technology J610S, J310S manual Uptime Command

Page 44

VTrak J610s, J310s Product Manual

0488

500000E01122C0F3

0x10

CN1

----

0

0519

500000E01122C493

0x10

CN1

----

0

0731

500000E01122C5B3

0x10

CN1

----

0

0751

500000E01122C5C3

0x10

CN1

----

0

0851

500000E01122C583

0x10

CN1

----

0

0864

5000155D21AB433E

0x10

CN1

----

0

0945

500000E0112313C3

0x10

CN1

----

0

The route command displays SAS addresses that are attached to one of the external ports on the J610s or J310s unit. Six items are reported:

Entry Number – Arbitrary numbers, listed in sequence

SAS Address – Of the disk drive or other component

Port ID – Phy numbers, shown in hexadecimal

Connector ID – One of two external SAS ports on the J610s or J310s unit

Next Entry – The next entry number for the same SAS address

Next Valid – 1 means there is another one. 0 means this is the last one

This device is connected to the J610s or J310s unit through connector CN1. See page 21 for a diagram of connectors on the I/O module.

If you type route at the cli> prompt and press Enter, then see the following message:

No SAS Routing Entry Exists

...it indicates that no devices are found on the table-routed (CN2) connector.

Uptime Command

The uptime command informs you of the elapsed period of time since the J610s or J310s unit was powered on.

To display uptime, at the cli> prompt, type uptime and press Enter.

cli>uptime

System has been running 1 hour 46 minutes 35 seconds

40

Image 44
Contents Vtrak Copyright TrademarksImportant data protection information RecommendationsContents Support Introduction About This ManualOverview VTrak J610s front view with bezel removedVTrak J610s rear view Architectural Description Features and Benefits Feature BenefitSpecifications CE Statement MIC Statement Warranty and SupportFCC Statement VTrak J610s, J310s Product Manual Installation Unpacking the VTrakVTrak J610s rear view Mounting VTrak J610s in a Rack VTrak J610s mounted in a rack with the supplied railsRack mount assembly diagram Mounting VTrak J310s in a Rack VTrak J310s mounted in a rack with the supplied railsSliding flange installation Mounting rail installation Installing Disk Drives AamuxDrive carrier with SAS disk drive Drive carrier with Sata disk drive and Aamux Drive Numbering VTrak J610s drive slot numberingSetting Up Data Cable Connections VTrak J610s has one or two I/O modules115200 Basic DAS Connection Cascading DAS Connection Redundant DAS Connection Setting Up Serial Cable Connections ConnectorConnecting the Power VTrak J310s front panel LED display. The J610s is similarSetting Up the CLI Connection VTrak J610s/J310s disk carrier LEDsVTrak J610s, J310s Product Manual Front Status Indicators ManagementDrive Status Indicators State LEDs Dark Steady Flashing Amber Red GreenLEDs State Module Status IndicatorsLEDs VTrak J610s power supply and fan LEDs CLI Command Set Cable CommandEnclosure Command InformationOperational 15340 rpm Settings Help Command Link CommandCN2 Route Command Uptime Command Vpdr Command ? CommandVTrak J610s, J310s Product Manual Frequently Asked Questions SupportTechnical Support Services Contacting Technical SupportUnited States NetherlandsGermany ItalyTaiwan ChinaLimited Warranty Disclaimer of other warrantiesReturning Product For Repair Your ResponsibilitiesOr retailer VTrak J610s, J310s Product Manual Appendix a Second I/O Module VTrak J610s, J310s Product Manual Symbols IndexCable 9, 22, 23 Index VTrak J610s, J310s Product Manual
Related manuals
Manual 62 pages 43.72 Kb

J610S, J310S specifications

Promise Technology is renowned for its innovative storage solutions, and the J310S and J610S series exemplify this commitment with features tailored for both personal and professional uses. These products stand out in today's data-driven environment, offering efficient and reliable storage management.

The Promise J310S is engineered to provide exceptional performance, making it suitable for creative professionals who deal with large media files. It supports various RAID levels, including 0, 1, and 5, enhancing data integrity and availability. With a sleek, compact design, the J310S is easily integrated into any workspace while ensuring optimal heat dissipation. One of its key features is the high-speed connectivity options, incorporating USB 3.0 and eSATA ports, which enable fast data transfers and expanded compatibility with various devices.

On the other hand, the J610S takes capabilities a notch higher, designed for businesses that require an advanced storage solution. This model supports a larger number of drives, allowing for more extensive data capacity and redundancy. The J610S emphasizes scalability, making it suitable for environments where data storage needs may grow over time. It also boasts an intuitive management interface, enabling IT admins to effortlessly monitor and configure storage settings.

Both models employ cutting-edge technologies to ensure reliability and performance. The integration of advanced thermal management technology prevents overheating, thereby extending the lifespan of the devices. Furthermore, both the J310S and J610S come equipped with powerful backup and recovery solutions, safeguarding critical data against potential loss.

Security is also a significant focus for Promise Technology, with both series featuring robust encryption capabilities to protect sensitive information. They support features like disk mirroring and hot-swappable drives, ensuring seamless operations even during maintenance.

In conclusion, the Promise Technology J310S and J610S provide exceptional solutions tailored for various storage needs. These models, marked by their reliability, scalability, and advanced technologies, are excellent choices for both professionals and organizations aiming to enhance their data storage capabilities. With a clear emphasis on performance and user-friendly management, Promise Technology continues to set benchmarks in the storage sector.