FieldServer FS-8700-78 instruction manual Driver Manual

Driver Manual

DA_Field	Only required when the	See Table 4.4.3.3 for a list of
	function is a write (wrbc) or	permitted values.
	when the map descriptor is
	associated with a write by
	means of the DA_Assoc
	parameter value.
	This is the name of the data
	field whose value you wish to
	set in the device.
	Other uses of this parameter are
	permitted. These uses are
	discussed in the Advanced
	Topics section of this manual.
DA_Assoc	Use to associate passive map	Any positive integer.
	descriptors with an active map
	descriptor.
	Using this parameter you
	associate multiple fields with
	one wrbc map descriptor, thus
	reducing writing multiple
	values to one device using just
	one message.

FieldServer Technologies 1991 Tarob Court, Milpitas, California 95035 (408) 262-2299 fax: (408) 262-9042

Visit our website: www.fieldserver.com E-mail: support@fieldserver.com

Page 9