Driver Manual
6.1.8Map Descriptor: Example 5 - Using a special / diagnostic command.
Map_Descrip tor_Name, Scan_Interval, Data_Array_Name , Data_Array_Offset, Function, | node_name, Address, Length, DA_Func, | |||||
A1, | 1.0s, | UNUSED_ARRAY, | 0 | , wrb | , No_node, 0, | 1 , |
A data array must | This command |
be associated with | is sent only |
the map descriptor | once. If you |
even though it will | need to do this |
not be used. It | periodically then |
may be any data | change this to a |
type. | wrbc. |
Must connect this map descriptor to a node whose node_id is zero. For example.
Nodes
Node_Name, Node_ID, Protocol, Port
Unit1, | 0, | Daire, | R1 |
This is a special
/dianostic command. It causes a one byte message to be sent.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 (408)
Visit our website: www.sierramonitor.com