FieldServer FS-8700-78 instruction manual Driver Manual Advanced Example

Driver Manual

6.1.4Advanced Example 1 :

Map_Descriptor_Name, Data_Array_Name, Data_Array_Offset, Function, node_name, Address, Length, DA_Func, DA_Field, Scan_Interval

A1,	DA_AI3,	0,	rdbc,	Node_A,	0,	1 ,	dap-stat,	temp	,5
A2,	DA_AI3,	1,	passive,	Node_A,	0,	1 ,	dap-stat,	hum	,5
A3,	DA_AI3,	2,	passive,	Node_A,	0,	1,	dap-stat,	d_temp	,5
A4,	DA_AI3,	3,	passive,	Node_A,	0,	1 ,	dap-stat,	hiTemp	,5
A5,	DA_AI3,	4,	passive,	Node_A,	0,	1 ,	dap-stat,	loTemp	,5
A6,	DA_AI2,	0,	passive,	Node_A,	0,	1 ,	dap-stat,	cs_on	,5
A7,	DA_AI2,	1,	passive,	Node_A,	0,	1 ,	dap-stat,	hs_on	,5

It would be	All these map	All these map	Slave is a DAP	These	The scan time
sensible for	descriptors address
DA_AI3 to be an	Node_a therefore	descriptors read	and we are	parameters need	is only
		their data from	reading status	to be typed in	important for
array of FLOATs	only one map
		the same slave.	information.	exactly as	the active map
because the temps	descriptor needs to
				specified in this	descriptor.
and humidity’s	read (rdbc) the node.
				manual. They
return real	The remaining map
				are case
numbers with one	descriptors can be
				sensitive.
digit after the	passive (thus
decimal point.	optimizing			The format of
	communications.)
DA_AI2 could be				the data
				extracted
any type of array
				depends on the
other than BIT
				parameter.
because the values
returned for these

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 (408) 262-6611 fax: (408) 262-9042

Visit our website: www.sierramonitor.com E-mail: sierra@sierramonitor.com

Page 28