FieldServer FS-8700-78 Driver Manual Client Side Connections Section Title, None

Driver Manual

4.2Client Side Connections

Section Title
Connections
Column Title	Function	Legal Values
Port	Specify which port the device is	P1-P8, R1-R2
	connected to the FieldServer	(P1-P8) requires 232/485
	This is the port connected to the	converter.
	DART’s RS232 port.
Secondary_Port*	Using a Dart ? Do not specify	P1-P8, R1-R2
	this parameter.	(R1-R2) requires 232/485
		converter.
Baud*	Specify baud rate	2400 (Others available but
		Daire only operates at 2400
		baud.)
Parity*	Specify parity	None
Data_Bits*	Specify data bits	8
Stop_Bits*	Specify stop bits	1
Protocol	Specify protocol used	Dart
	Either keyword may be used.
Handshaking*	Specify hardware handshaking	None
Poll Delay*	Time between internal polls	0-32000 seconds
		default 1 second
Example

//Client Side Connections

Connections
Port, Parity, Data_Bits, Stop_Bits,				Protocol, Poll_Delay
P1,	2400 , None,	8,	1,	Dart	, 0.100s

FieldServer Technologies 1991 Tarob Court, Milpitas, California 95035 (408) 262-2299 fax: (408) 262-9042

Visit our website: www.fieldserver.com E-mail: support@fieldserver.com

Page 6