Driver Manual
1081 | 1 | 1 | s_delay | X | X | X | X |
1082 | 2 | 1 | t_calib | X | X | X | X |
1083 | 1 | 1 | t_dband | X | X | X | X |
1084 | 2 | 1 | t_setpt | X | X | X | X |
1085 | 4 | 1 | valve_config | X | X | X | X |
1086 | 4 | 1 | voice | X | X | X | X |
1100 | 1 | 1 | sensor_1_name |
|
| x | x |
1101 | 1 | 1 | sensor_1_units |
|
| x | x |
1102 | 1 | 1 | sensor_1_type |
|
| x | x |
1103 | 1 | 1 | sensor_1_min_val |
|
| x | x |
1104 | 1 | 1 | sensor_1_max_val |
|
| x | x |
1105 | 1 | 1 | sensor_1_cal |
|
| x | x |
1106 | 1 | 1 | sensor_2_name |
|
| x | x |
1107 | 1 | 1 | sensor_2_units |
|
| x | x |
1108 | 1 | 1 | sensor_2_type |
|
| x | x |
1109 | 1 | 1 | sensor_2_min_val |
|
| x | x |
1110 | 1 | 1 | sensor_2_max_val |
|
| x | x |
1111 | 1 | 1 | sensor_2_cal |
|
| x | x |
1112 | 1 | 1 | sensor_1_input |
|
| x | x |
1113 | 1 | 1 | sensor_2_input |
|
| x | x |
1114 | 1 | 1 | sensor_3_input |
|
| x | x |
4.4.6Unit Types
When the driver reads everything from a device it must first obtain the device’s unit type so that it can determine what other data is available. Once the unit type is obtained then the driver updates the
The following table lists the unit type that can be processed by this driver.
Unit Type | Numeric Unit Type | Description |
0 | ||
"1" | 1 | 044 data logger |
"2" | 2 | 046 expanded DAP |
"3" | 3 | 046 2 mod chiller |
"4' | 4 | 046 3 mod chiller |
"5" | 5 | 048 DAP, |
"6" | 6 | 049 DAP, |
FieldServer Technologies 1991 Tarob Court, Milpitas, California 95035 (408)
Visit our website: www.fieldserver.com
Page 17