| Page 15 of 24 |
4.4.8.Map Descriptor Example 5 - Analog Output 1 (Zone Machine)
A write to the Analog Output Data Array which is shared by a BACNet IP Map Descriptor will command a zone on the Lutron eLumen panel to the written intensity. Intensities are written as a percentage value (0 to 100%).
BACNet IP Map Descriptor
//Client Side Map Descriptors
Map_Descriptors |
|
|
|
|
|
|
|
|
Map_Descriptor_Name, | Data_Array_Name, | Data_Array_Offset, | Function, | Node_name, | Data_Type, | Object_ID, | Length, | Relinquish_Default |
SMD000_AO, | Analog_Output, | 0, | Server, | Virtual_BCU_11, | AO, | 1, | 512, | 0 |
Lutron Machine Map Descriptor
//Client Side Map Descriptors
Map_Descriptors |
|
|
|
|
|
|
|
|
|
Map_Descriptor_Name, | Data_Array_Name, | Data_Array_Offset, | Function, | Node_name, | Grafik_Command, | zone, | DA_Lut_Parms, | DA_Lut_Parms_Offset, | Length |
Fade_to_lvl_0, | Analog_Output, | 0, | AWT, | LUT_GRF6_0, | fade_zone, | 0, | Zone_pars_AO1, | 0, | 512 |
The zone field must be used to indicate the start zone number that will be associated with the first element of the Data Array specified under Data_Array_Name . Zone numbers increase with the Length field in association with increasing offset into the Data Array.
Fade and Delay times per zone must be preloaded into the Data Array specified under “DA_Lut_Parms”: //================================================================================
//Analog Output1 Settings Setup
//All values are in decimal ( 0 - 65535 )
//Fade time in even locations, Delay time in uneven locations
//Fill in time values under Preload_Data_Value
| Preloads |
|
|
|
|
|
|
|
| |
| Data_Array_Name , | Preload_Data_Format , | Preload_Data_Value , | Location | ||||||
| // Analog Output1 Object ID 1 | Uint16 | , |
| 0 | , |
| 0 |
| |
| Zone_pars_AO1 , |
|
|
| ||||||
| Zone_pars_AO1 , |
| Uint16 | , |
| 1 | , |
| 1 |
|
| // Analog Output1 Object ID 2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Zone_pars_AO1 , |
| Uint16 | , |
| 2 | , |
| 2 |
|
| Zone_pars_AO1 , |
| Uint16 | , |
| 3 | , |
| 3 |
|
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408)