| Page 9 of 11 |
4.3.Client Side Node Descriptors
Section Title |
|
|
Nodes |
|
|
Column Title | Function | Legal Values |
Node_Name | Provide name for node | Up to 32 alphanumeric characters |
| The eLumen processor address. |
|
Node_ID | Only decimal values are allowed: | |
| e.g. 11 hex must be entered as |
|
| 17. |
|
Protocol | Specify protocol used | eLumen |
Connection | Specify which port the device is | |
| connected to the FieldServer |
|
Node_type | Specifies the eLumen command | Hex, decimal |
| and data format |
|
Example |
|
|
//Client Side Nodes
Nodes |
|
|
|
|
Node_Name, | Node_ID, | Protocol, | Port, | Node_Type |
LUT_GRF6_0, | 17, | eLumen, | P1, | Hex |
4.4.Client Side Map Descriptors
4.4.1.FieldServer Related Map Descriptor Parameters
Column Title |
| Function |
|
|
| Legal Values |
| ||
Map_Descriptor_Name | Name | of | this | Map | Up | to | 32 | alphanumeric | |
Descriptor |
|
| characters |
|
| ||||
|
|
|
|
| |||||
| Name | of | Data | Array | One of the Data Array | ||||
Data_Array_Name | where data is to be | ||||||||
stored |
| in | the | names | from | “Data | Array” | ||
| FieldServer |
|
| section above |
|
| |||
|
|
|
|
|
|
|
| ||
Data_Array_Offset | Starting location in Data | 0 to | maximum specified in | ||||||
Array |
|
|
| “Data Array” section above | |||||
|
|
|
| ||||||
Function | Function of Client Map | ARCO, | AWT, | RDBC, | |||||
Descriptor |
|
| Passive_Client |
|
| ||||
|
|
|
|
| |||||
4.4.2.Driver Related Map Descriptor Parameters
Column Title | Function | Legal Values |
|
| One of the node names |
Node_Name | Name of Node to fetch data from | specified in “Client Node |
|
| Descriptor” above |
|
| Area Machine: |
Grafik_Command | Specifies the command that will be | run_script_AB |
sent to the eLumen. | area_sts_offscene | |
| sel_scene_in_area | |
|
| |
|
| run_script_multi |
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408)