| Page 3 of 11 |
1.Lutron Machine Description
The Lutron Machine driver allows the FieldServer to transfer data to and from devices over RS- 232 using Lutron eLumen protocol. The FieldServer can emulate either a Server or Client, although the Lutron Machine driver is only available in Client configuration. Any Server drivers are for FieldServer testing purposes only.
Max Nodes Supported
| FieldServer Mode | Nodes |
|
| Comments |
| Client | 1 |
|
| Only one Lutron Machine driver Client node is able to be |
|
|
| connected to a Lutron eLumen panel. | ||
|
|
|
|
| |
| Server | 1 |
|
| One BACNet IP node provides an upstream interface to the |
|
|
| Lutron eLumen panel. | ||
|
|
|
|
|
The Lutron Grafik Machine Zone/Area Machine driver, hereafter simply referred to as the Lutron Machine driver, provides a BACNet IP interface to a Lutron eLumen panel. The driver can be configured to represent zones or areas as used in the Lutron eLumen panel. The FieldServer acts as both Client and Server to provide BACNet objects to an external BACNet Client. In Server mode, the FieldServer collects data from the eLumen panel and holds the data ready for reads from an external BACNet Client. In Client mode, the FieldServer executes
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408)