ATM Commands
SHOW ATM CONFIGURATION
Valid context: Profile
Shows the ATM configuration settings for the ATM VC associated with the current profile.
Show ATM VC
Shows the table of ATM VCs (Virtual Circuits) and their properties.
SET ATM VC <vpi> <vci> <LLC VCMUXBRIDGED> [rate MAX]
Valid context: Profile
Configures an ATM VC (Virtual Circuit) for this interface.
<vpi> | Virtual Path Identifier. Range: |
|
|
<vci> | Virtual Channel Identfier. Range: |
|
|
Encapsulation type (LLC or VCMUXBRIDGED). | |
| LLC: Use LLC (may carry different protocols). |
| VCMUXBRIDGED: Use VC Multiplexed (carries only one type of |
| protocol). |
|
|
[rate] | Optional 'max' or Peak Cell Rate in kilobits per second. Default: |
| MAX. Range: |
|
|
SET ATM SERVICE CATEGORY {UBR CBR}
Valid context: Profile
Sets the ATM service category for the current profile.
UBR
CBR
Unspecified Bit Rate (default). No service guarantees. ATM cells are sent but no feedback is returned about whether or not data has reached its destination. Suitable for http, ftp, and other data transfer protocols that are not
Constant Bit Rate. This service category promises a constant transport rate. Suitable for
Command Line Reference | Page 63 |