Eicon Networks 2440 NAT Network Address Translation Commands, UDP or TCP protocol, Show IP NAT

Page 78

NAT (Network Address Translation) Commands

ENABLE NAT

DISABLE NAT

Valid context: Profile, Port

Enables/disables NAT (Network Address Translation). NAT allows your router to use only one IP address when communicating with remote sites via the ADSL port, effectively 'hiding' connected devices. Enabled by default.

SHOW IP NAT

Displays the IP NAT table, which contains the settings for all computers on the internal LAN that are visible to the external network.

ADD IP NAT <UDP TCP> <port> <ipaddress>

DELETE IP NAT <UDP TCP> <port>

ADD IP NAT allows a computer on the internal LAN to be visible to the external network for a particular protocol. For example, if you want an internal computer to function as a SMTP (E-mail) server, set TCP to port 25 and enter the IP address of the computer.

Use DELETE IP NAT to remove the NAT assignment.

UDP TCP	UDP or TCP protocol.

<port>	Port to use.

<ipaddress>	IP address of the computer on the internal LAN.

SET IP NAT <UDP TCP> <port> <ipaddress>

Changes an existing entry in IP NAT table.

UDP TCP	UDP or TCP protocol.

<port>	Port to use.

<ipaddress>	IP address of the computer on the internal LAN.

Command Line Reference

Page 78

Image 78

Contents Diva 2440 Adsl Router User’s Guide Second Edition June 206-378-02 Contents Index Introduction How Adsl WorksHardware Features General FeaturesAdsl and Network Features Introducing the Diva 2440 Adsl RouterPackage Contents Connection Scenarios One ComputerTwo Computers at Once More than Two Computers Adsl line DivaHow Adsl Works Splitters and ‘Splitterless’ OperationMicrofilters Setup About Microfilters Technical SupportConnecting to Both Ports OverviewRequirements Internet Account Information Ports and Indicator Lights PortsIndicator Lights Power LightConnect the Cables Adsl Cable NotesEthernet Cable Notes Updating or reinstalling USB drivers USB Cable NotesTo continue Access the Diva 2440 Web Interface Complete the Internet Wizard LinkSetup Complete Optional Installing the Diva Assistant Setup Connecting a Second Computer LAN Setup About the Ethernet CableBuilt-in Dhcp Server General Setup ProcedureUsing the Diva Assistant to set on a LAN IP AddressingIf your LAN uses Static IP Addresses Adjusting LAN SettingsIf your LAN has a Dhcp Server If your LAN has a routerConfiguring TCP/IP TCP/IP SetupInstalling TCP/IP Windows 95/98Windows NT Verifying TCP/IP Settings WindowsApple Macintosh Mac OS 8 or later Setup Troubleshooting Browser SettingsConnecting a Phone to the Pass-through Phone Port Connecting a Microfilter About MicrofiltersTechnical Support General Information Resetting the Device Upgrading FirmwareAbout the Diva Assistant General Information Reset Settings to Factory Defaults Resetting the DeviceNormal Reset Boot ModeStarting the Web-based Configuration Interface Procedure‘Reset’ and other buttons on the Main Menu Editing Settings PagesBacking up the current configuration Configurations Saving, Restoring, and ResettingAccessing the Configuration Restoring a configuration from a fileUpgrading Firmware Backing up Configuration FilesOpening to the Firmware Maintenance Retrieving Firmware from the Eicon Networks Web SiteUsing your Diva Defining a password Login Password and other Security FeaturesLogin Password Erasing the system passwordAutomatic Log Out IP Filtering Security LevelNetwork Address Translation About the Diva Assistant Launching the Diva AssistantGeneral Tab Diagnostic Log Tab Performance TabTools Tab Advanced Topics Diva Requirements Setting up a VPN with Windows 95/98Virtual Private Networking InstructionsAdvanced Topics Setting up a VPN with Windows Connecting the VPN Security benefits Network Address TranslationHow It Works NAT static mappingsSpecifying a Default NAT Server Creating Static NAT Mappings‘Default NAT Server’ field Diva Command Line Interface CLI Establishing a Telnet ConnectionPrerequisites Using the CLI Command Line ReferenceUsing Tftp to Transfer Files Uploading/downloading configuration filesEnabling Tftp server support Examples Loading New firmware via TftpRetrieving message.txt Command Line Reference Cancel Notational ConventionsSET Adsl Modulation Type G9922 Multimode Adsl CommandsShow Adsl Configuration Show Adsl StatisticsSET ATM Service Category UBR CBR ATM CommandsShow ATM Configuration Show ATM VCDhcp Commands Ipaddress IP address of the Wins server Primary Wins serverSecondary Wins server Domain Domain name, a string of up to 31 charactersDelete Dhcp Staticmap ipaddress Ipaddress IP address of the entry to enable or disableIpaddress IP address of the entry to delete Show Dhcp StaticmapEthernet Commands Show Ethernet StatisticsShow Ethernet Address Number Number of the filter that is to be deleted Filter CommandsNumber Position where new filter is to be added Number Number of the filter to editDiscard the data Filter applies to both incoming and outgoing data defaultNumber Number of the filter to copy Forward the data to the next filterApplies to UDP data Applied to TCP data defaultApplies to all data Applies to TCP connection SYN dataMacaddress Source or destination MAC address Enable Ethernet multicast filteringDisable Ethernet multicast filtering Type Hexidecimal number indicating type of Ethernet frameGeneral Commands Hours Range 00 to Minutes SecondsEnable Echo Server Disable Echo Server ResetReset Factory Enable Sysman Disable SysmanIP Commands General Show Statistics Ping ipaddress number sizeIP Routing Commands Show IP RouteLogging and Internal Trace Commands Enable all module messagesTaskName Module name as seen in Show LOG. Examples Dhcp UDP or TCP protocol NAT Network Address Translation CommandsEnable NAT Disable NAT Show IP NATPPP Commands Value Range 0-2147483647. DefaultEnable PPP Phase Logging Disable PPP Phase Logging Value Range 0-2147483647 milliseconds. DefaultEnable PPP Echo Request Disable PPP Echo Request Enable PPP FSM Logging Disable PPP FSM LoggingSET PPP Local Username SET PPP Local Password Show PPP ConfigurationShow Profiles Profile CommandsEnable Profile Disable Profile Connect DisconnectIndex Index of the VC taken from the SAR VC table SAR CommandsShow SAR Configuration Show SAR VC indexTftp Commands Enable Tftp Server Disable Tftp ServerShow Timeprotocol Configuration Time Protocol CommandsEnable Timeprotocol Disable Timeprotocol TimeServer Address of the time serverSpecifications Regulatory Information for CanadaThis Section Specifications General SpecificationsSoftware and Firmware Specifications Regulatory Information for the United States Declaration of ConformityFCC Part 68 Notice Safety Notice Regulatory Information for Canada Regulatory Information for the European Union Safety Status TNV-3Power Consumption EU Declaration of ConformityIndex Index