Eicon Networks 2440 manual IP Routing Commands, Show IP Route

IP Routing Commands

ADD IP ROUTE <ipaddress> <mask>[:metric] [gateway]

DELETE IP ROUTE <ipaddress> [mask[:metric]]

SET IP ROUTE <ipaddress> <mask>[:metric] [gateway]

Valid context: Profile, Port

Adds/deletes/modifies a static IP route.

<ipaddress>	IP address of datagrams that should be routed.
<mask>	Mask for IP address. You can specify the number of bits checked
	when comparing the address of a datagram to that specified by the
	<ipaddress> parameter (range: 0-32) or the full IP mask in dotted
	format. Optional for DELETE command.
[:metric]	Metric (i.e. cost) for the destination (optional).
[gateway]	If a match is found, datagrams are forwarded to this IP address
	(optional).

SHOW IP ROUTE

Valid context: Profile, Port

Displays all defined static and dynamic IP routes.

Command Line Reference Page 76