Time Protocol Commands
SET TIMEPROTOCOL SERVER <timeServer>
Defines the Internet address of a time server. The device will then periodically fetch the date and time from the timer server to update its internal clock. The timeserver is enabled by default.
<timeServer>
address of the time server.
SET TIMEPROTOCOL ZONE <timeZoneDiff>
Defines the difference, in hours, between your time zone and Greenwich Mean Time (GMT).
Range
-12 to 12.
ENABLE TIMEPROTOCOL
DISABLE TIMEPROTOCOL
Enables/disables time synchronization with a time server. If enables, the device will periodically fetch the date and time from the timer server to update its internal clock. The time server address is defined with SET TIMEPROTOCOL SERVER. By default the time is fetched from your computer.
SHOW TIMEPROTOCOL CONFIGURATION
Displays the time protocol settings.
Command Line Reference | Page 85 |