Check Check
Mailpiece Meter
Clear | Tape | Seal | Power | ||
|
| Only | + Seal | Only |
|
To print postage and seal the envelope
Check Check
Mailpiece Meter
Clear | Tape | Seal | Power | ||
|
| Only | + Seal | Only |
|
To print postage only
Check Check
Mailpiece Meter
Clear | Tape | Seal | Power | ||
|
| Only | + Seal | Only |
|
To seal only
6.Adjust the side guide to fit the envelope width. To find the envelope width, place the envelope on the deck and against the rear wall. Adjust the sideguide so that only 1/16" of space is between the envelope and the sideguide.
For larger mailers (9" x 12"), lay plastic guide flat and raise secondary metal side guide. Adjust same way as above.
7.Select the mode by pressing one of the keys as indicated in the illustrations to the left.
Always feed already sealed envelopes in Print Only mode. Feeding sealed envelopes in other modes may cause jams.
The envelope automatically feeds, seals and prints.
If you selected to seal the envelope: after the envelope ejects into the catcher tray, apply pressure to the envelope to finish sealing.
After the envelopes have been processed, the mailing machine automatically shuts off.
To feed more envelopes in the same mode, press the desired mode.
If the Check Mailpiece or Check Meter lights are lit, correct the problem and press Clear. Refeed the mailpiece. For details, see Troubleshooting, section 6.
8
SV60975 Rev A