Pitney Bowes E589 manual Before You Run Envelopes or Print Tapes

Page 11

Before You Run Envelopes or Print Tapes

2 Before You Run Envelopes or Print Tapes

1. a. Connect the spider power cord as shown below.

b. Read the safety information on page v before

connecting the mailing machine. Make sure the wall outlet is near the machine and is easily accessible. Connect the single power cord from wall outlet to left rear of machine. The green Power light will come on.

Female Plug:
Meter Power In
	Mail Plug:
	Power Out
Female Plug: Mail	Female Plug:	006E585
Machine Power In	Power In

Viewed From Rear Of Mailing Machine

2.Install and set the date on the meter.

•Turn the key upright to the unlocked position.

• Move the operate/remove lever forward to

the remove position .

SV60975 Rev A

5

Image 11

Contents E589Series Mailing Machine Operating Guide FCC Compliance Mailing Machine Contents Contents Safety Precautions Page About Your Mailing Machine IntroductionFeature Function FeaturesTop Tension Knob Control Panel SymbolsBefore You Run Envelopes or Print Tapes Before You Run Envelopes or Print Tapes Envelopes To Print and Seal EnvelopesTo print postage and seal the envelope To Print a Tape Page Locking the Meter Adjustments and SuppliesLocking the Mailing Machine to Prevent Use Removing the Postage Meter Refilling the Tape Dispenser Filling the Fluid Bottle Replacing the Ink Cartridge Adjusting the Ejector Rollers Adjusting the Feeder Supply Ordering SuppliesMultiple Or Double Feeding TroubleshootingEnvelope/Tape Does Not Feed Envelopes Do Not Stay In Catcher Tray Envelope Does Not SealInsufficient Or Partial Sealing Envelope Does Not EjectPostage Imprint Incomplete Or Broken Tape Does Not FeedPostage Imprint Too Light No Postage Imprint On Envelope Print + Seal Envelope Jams In MachineTop Of Envelope Creased Specifications Compliance Environmental