Pitney Bowes E589 manual Tape Does Not Feed, Postage Imprint Too Light

Page 27

Troubleshooting

Tape Does Not Feed

Indicator Light	Cause
None	Out of tape.
Check mailpiece	Tape pack not fully
Power light blinks.	inserted.
	More than 50 tapes
	in slot.
	Tape is jammed.

Solution

Add tape. For more information see page l3.

Push pack in fully to solid stop.

Remove some tapes.

Remove meter to clear jammed tape. See page 12. Press Clear to reset.

Postage Imprint Too Light

Indicator Light	Cause
None	Ink cartridge needs
	replacing.

Solution

Install new ink cartridge. Do not reuse ink cartridge or add ink. See page 15.

Postage Imprint Incomplete Or Broken

Indicator Light	Cause
None	Contents of envelope
	not flush to top and
	right edge of envelope
	when postage printed.

Solution

Tamp contents to top and right edge of envelope before feeding.

SV60975 Rev A

21

Image 27

Contents E589Series Mailing Machine Operating Guide FCC Compliance Mailing Machine Contents Contents Safety Precautions Page About Your Mailing Machine IntroductionFeature Function FeaturesTop Tension Knob Control Panel SymbolsBefore You Run Envelopes or Print Tapes Before You Run Envelopes or Print Tapes Envelopes To Print and Seal EnvelopesTo print postage and seal the envelope To Print a Tape Page Adjustments and Supplies Locking the Mailing Machine to Prevent UseLocking the Meter Removing the Postage Meter Refilling the Tape Dispenser Filling the Fluid Bottle Replacing the Ink Cartridge Adjusting the Ejector Rollers Adjusting the Feeder Supply Ordering SuppliesTroubleshooting Envelope/Tape Does Not FeedMultiple Or Double Feeding Envelopes Do Not Stay In Catcher Tray Envelope Does Not SealInsufficient Or Partial Sealing Envelope Does Not EjectTape Does Not Feed Postage Imprint Too LightPostage Imprint Incomplete Or Broken No Postage Imprint On Envelope Print + Seal Envelope Jams In MachineTop Of Envelope Creased Specifications Compliance Environmental