Pitney Bowes E589 manual Replacing the Ink Cartridge

Page 21

Supplies and Adjustments

Replacing the Ink Cartridge

When the print becomes light, replace the ink cartridge, as follows:

1. Remove the postage meter. (See instructions on page 12.)

2. Remove the old ink cartridge. Push to the left until the cartridge pops up.

Use the finger grips on the sides of the cartridge to pull the cartridge up and out.

3. Remove the protective cap from the new ink cartridge. Hold the new cartridge by the finger grips and lower it into the pocket.

Apply pressure downwards on the arrow until the cartridge snaps into place.

SV60975 Rev A

15

Image 21
Contents E589Series Mailing Machine Operating Guide FCC Compliance Mailing Machine Contents Contents Safety Precautions Page About Your Mailing Machine IntroductionFeature Function FeaturesTop Tension Knob Control Panel SymbolsBefore You Run Envelopes or Print Tapes Before You Run Envelopes or Print Tapes Envelopes To Print and Seal EnvelopesTo print postage and seal the envelope To Print a Tape Page Adjustments and Supplies Locking the Mailing Machine to Prevent UseLocking the Meter Removing the Postage Meter Refilling the Tape Dispenser Filling the Fluid Bottle Replacing the Ink Cartridge Adjusting the Ejector Rollers Adjusting the Feeder Supply Ordering SuppliesTroubleshooting Envelope/Tape Does Not FeedMultiple Or Double Feeding Insufficient Or Partial Sealing Envelope Does Not SealEnvelope Does Not Eject Envelopes Do Not Stay In Catcher TrayTape Does Not Feed Postage Imprint Too LightPostage Imprint Incomplete Or Broken No Postage Imprint On Envelope Print + Seal Envelope Jams In MachineTop Of Envelope Creased Specifications Compliance Environmental