Pitney Bowes E589 manual Safety Precautions

Page 5

Safety Precautions

Safety Precautions

When using this machine, follow the normal safety precautions for all office equipment:

Keep loose clothing, jewelry and long hair away from all moving parts.

Avoid touching moving parts or materials while the machine is in use. When clearing a jam, be sure machine mechanisms come to a stop before you open the front cover.

Be certain that the area in front of the wall outlet that this machine is plugged into is free from obstruction.

To reduce the risk of fire and/or electrical shock, do not attempt to disassemble this machine. If service is required, contact your Pitney Bowes Customer Service Representative.

The power cord wall plug is the primary means of disconnecting the machine from the AC power. The wall outlet should be near the machine and easily accessible.

To protect against shock, the power cord should only be plugged into a grounded wall outlet. The ground pin on the plug should never be removed.

To prevent overheating, do not cover vent openings.

All areas of the machine requiring disassembly or removal of covers should be accessed only by your Pitney Bowes Customer Service Representative.

Do not remove covers. This machine cabinet serves to enclose hazardous parts. If the machine has been dropped or the cabinet has been damaged in any way, notify your Pitney Bowes Cus-

tomer Service Representative.

Read all instructions before attempting to operate this equipment.

Use this equipment only for its intended purpose.

In addition, follow any specific occupational safety and health standards for your workplace or area.

SV60975 Rev A

v

Image 5
Contents E589Series Mailing Machine Operating Guide FCC Compliance Mailing Machine Contents Contents Safety Precautions Page About Your Mailing Machine IntroductionFeature Function FeaturesTop Tension Knob Control Panel SymbolsBefore You Run Envelopes or Print Tapes Before You Run Envelopes or Print Tapes Envelopes To Print and Seal EnvelopesTo print postage and seal the envelope To Print a Tape Page Locking the Meter Adjustments and SuppliesLocking the Mailing Machine to Prevent Use Removing the Postage Meter Refilling the Tape Dispenser Filling the Fluid Bottle Replacing the Ink Cartridge Adjusting the Ejector Rollers Adjusting the Feeder Supply Ordering SuppliesMultiple Or Double Feeding TroubleshootingEnvelope/Tape Does Not Feed Insufficient Or Partial Sealing Envelope Does Not SealEnvelope Does Not Eject Envelopes Do Not Stay In Catcher TrayPostage Imprint Incomplete Or Broken Tape Does Not FeedPostage Imprint Too Light No Postage Imprint On Envelope Print + Seal Envelope Jams In MachineTop Of Envelope Creased Specifications Compliance Environmental