Pitney Bowes E589 manual Features, Feature Function

Page 8

Introduction

	Features	Strip Tape Holder	Instruction
			Cards

Strip Tape

Dispenser

Rear Wall

E589_001

Control

Panel

Side Guide

Feeder

Feature	Function
Feeder	For feeding envelopes.
Side Guide	Adjusts for envelope width to guide envelope
	along feed deck. Lays flat for large envelopes or
	flats. Pushes in for narrow envelopes.
Rear Wall	Guides envelopes through the unit. Envelopes
	must be kept flush against the wall when feed-
	ing.
Strip Tape Dispenser	Automatically feeds strip tapes.
Strip Tape Holder	Stores additional strip tapes.
Instruction Cards	Pull up for quick reference.
Control Panel	Controls operation of the mailing machine and
	autofeeder. Press key for desired mode of
	operation to begin processing mail.
	Note: Machine remains in a sleep mode until
	you press a key. The green power light will
	remain on.

2	SV60975 Rev A

Image 8

Contents E589Series Mailing Machine Operating Guide FCC Compliance Mailing Machine Contents Contents Safety Precautions Page Introduction About Your Mailing MachineFeatures Feature FunctionTop Tension Knob Symbols Control PanelBefore You Run Envelopes or Print Tapes Before You Run Envelopes or Print Tapes To Print and Seal Envelopes EnvelopesTo print postage and seal the envelope To Print a Tape Page Locking the Meter Adjustments and SuppliesLocking the Mailing Machine to Prevent Use Removing the Postage Meter Refilling the Tape Dispenser Filling the Fluid Bottle Replacing the Ink Cartridge Adjusting the Ejector Rollers Adjusting the Feeder Ordering Supplies SupplyMultiple Or Double Feeding TroubleshootingEnvelope/Tape Does Not Feed Envelope Does Not Seal Insufficient Or Partial SealingEnvelope Does Not Eject Envelopes Do Not Stay In Catcher TrayPostage Imprint Incomplete Or Broken Tape Does Not FeedPostage Imprint Too Light No Postage Imprint On Envelope Envelope Jams In Machine Print + SealTop Of Envelope Creased Specifications Environmental Compliance